Quote:
Originally Posted by Greg Reimer 7376
Thank you very much for the schematics of the valve body. Sometimes when using some one else's race trans, it's sometimes hard to find out just what the fine points of each builder's transes are. The schematic really helped. Now its time to compare some spool valves without mixing anything up and see what the differences are. Thanks again,Greg
P.S. Are the cases the same from a rear pump earlier aluminum trans to the later ones without the rear case?
|
The oil passages at the rear of the cases are different from rear pump models and the non rear pump models (both alum cases).
If you block off the rear passages with a plate and drill the rear pump case for a transbrake it works the same as a non rear pump case.
The plate blocks the oil bleed to the stock rear support where the governor is removed also.
Hope this answers your question.
Just my experience.
Rick Cates
Canyon, TX