CLASS RACER FORUM - View Single Post - GM 12 Bolt

Jim Kaekel · 04-22-2021, 11:33 AM

I've made a couple, one for my son's and for my own car, both for 12-bolts. Similar to what Rich B. above says, I used a piece of 1/4" thick x 1" wide 90° angle aluminum x about 6" long. Drilled a pair of 1/4" holes through the webs for mounting. Mine are certainly not CNC quality but I think as long as the sensor winds up .050"-.100" from the split collar, you're alright.

04-22-2021, 11:33 AM	#8
Jim Kaekel VIP Member Join Date: Jul 2002 Location: Michigan Posts: 1,229 Likes: 133 Liked 535 Times in 110 Posts	Re: GM 12 Bolt - Racepak Drive Line Sensor Bracket I've made a couple, one for my son's and for my own car, both for 12-bolts. Similar to what Rich B. above says, I used a piece of 1/4" thick x 1" wide 90° angle aluminum x about 6" long. Drilled a pair of 1/4" holes through the webs for mounting. Mine are certainly not CNC quality but I think as long as the sensor winds up .050"-.100" from the split collar, you're alright. __________________ Jim Kaekel 3836 STK