Quote:
Originally Posted by mtwilly
Thanks, Rob! For the pan hard and lower control arms, are you using adjustable stuff or fixed, and what about relocation brackets for the control arms? Also, any thoughts on shocks and springs for the rear?
Thanks again, Rob. Greatly appreciated!
|
Tubular nonadjustable lower control arms. Frame reinforcement kit from S&W and a good anti roll bar is all you should need. Stock springs work fine if it sits too high you can remove the upper rubber from the spring. All of the stockers you see have weight in the rear. Afco shocks from Fastshocks for the front are most critical. Even stock gas back shocks work fine as long as they are in good shape.