[dragracerray]

Originally Posted by Al Wilson

I had a similar problem on Strange rear disc brake conversion I did once. These were two piston calipers with a bleed valve on the top and bottom of the calipers. What I had to do was take the caliper off (with brake line still attached), turn it upside down and bleed the other end that was on the bottom. Problem solved.

Brian I also had problems bleeding Strange brakes. I use a dual caliper brake on the rear. One of the calipers is horizontal which means the bleeders are horizontal and part of the hydraulic part of the inside of the caliper is above the bleeder. I use braided line to each caliper so what I had to do is disconnect the caliper from the caliper bracket so the bleeders point straight up and straight down to bleed them(tywrap them in place for bleeding). Solved my problem on the first attempt. Here is my earlier CR post with pictures. Ray

https://classracer.com/classforum/sh...ad.php?t=67964