CLASS RACER FORUM - View Single Post

NHRA1926 · 02-16-2022, 10:36 AM

Thanks for all the replies. I talked to Paul at Turbo Action. He helped me figure out the problem. There are 3 mounting positions for the hold down bracket on the shifter mounting plate. I had the bracket installed in the rearward most holes. Ended up, I needed to have it in the next forward holes to allow the cable to travel the correct distance. So it was a relatively easy fix. Thanks again for the suggestions.

02-16-2022, 10:36 AM	#6
NHRA1926 Member Join Date: Dec 2015 Location: Bowling green, Ky Posts: 241 Likes: 12 Liked 232 Times in 69 Posts	Re: Turbo Action Shifter Issue Thanks for all the replies. I talked to Paul at Turbo Action. He helped me figure out the problem. There are 3 mounting positions for the hold down bracket on the shifter mounting plate. I had the bracket installed in the rearward most holes. Ended up, I needed to have it in the next forward holes to allow the cable to travel the correct distance. So it was a relatively easy fix. Thanks again for the suggestions.