CLASS RACER FORUM - View Single Post

Bill Rolik · 09-04-2022, 08:47 PM

Many years ago, for my Duster, I obtained aluminum upper and lower control arm bushings from Bob Henry (62 Dodge 383/343 SS/HA) in the Syracuse, NY area. These bushings had teflon inserts, and were designed so that there was NO resistance to travel. Fantastic. After they were installed, Arnew did the toe pattern correction work. Double fantastic. Today, with your Afco's, or perhaps Santhuff shocks, you should be all set on your Cuda.

I believe that Gary Ewing in MD is the only one who offers these today. His current number should be 410-284-3030. He is at Indy, so I would wait until later in the week to make contact.

Bill Rolik

1514 SS

09-04-2022, 08:47 PM	#11
Bill Rolik Member Join Date: Feb 2002 Location: Hasbrouck Heights, NJ Posts: 122 Likes: 1 Liked 47 Times in 9 Posts	Re: 67 Barracuda front suspension Many years ago, for my Duster, I obtained aluminum upper and lower control arm bushings from Bob Henry (62 Dodge 383/343 SS/HA) in the Syracuse, NY area. These bushings had teflon inserts, and were designed so that there was NO resistance to travel. Fantastic. After they were installed, Arnew did the toe pattern correction work. Double fantastic. Today, with your Afco's, or perhaps Santhuff shocks, you should be all set on your Cuda. I believe that Gary Ewing in MD is the only one who offers these today. His current number should be 410-284-3030. He is at Indy, so I would wait until later in the week to make contact. Bill Rolik 1514 SS