CLASS RACER FORUM - View Single Post

SGSST109E · 11-03-2022, 07:48 AM

My gas 7kw is air cool and you have to pull it out of the trailer to work on it. Removing the cover is extremely difficult to remove. Mine case has 4 torques screws holding it on. I am going to weld wing nuts to the top of the screws so the can be removed by hand. You can never reach the screws in the trailer cabinet with a ratchet unless you jack up the generator to get your hand in there.

11-03-2022, 07:48 AM	#10
SGSST109E Member Join Date: Jun 2007 Location: NJ Posts: 351 Likes: 62 Liked 126 Times in 61 Posts	Re: Onan 7kw generator problem My gas 7kw is air cool and you have to pull it out of the trailer to work on it. Removing the cover is extremely difficult to remove. Mine case has 4 torques screws holding it on. I am going to weld wing nuts to the top of the screws so the can be removed by hand. You can never reach the screws in the trailer cabinet with a ratchet unless you jack up the generator to get your hand in there.