Quote:
Originally Posted by tolaas
My front subframe are a little wrecked at left side,so my Camaro 67 are lower on that side, about 20mm on the rear.
If i bye a new one, AMD or OER, are they worth the money or are they badder then that one i alredy have?
Thank`s
|
Good morning to all,
You might want to take a micrometer to the steel on that front sub frame (H frame) the 1967 Camaro had the lightest H frame. As I recall they .015 to .020 thinner and that made a nice difference. So if you're going to replace that frame just be aware of that difference in weight. Now if it was replaced once before you owned the car there may be no difference. You might want to bring that frame to a good welder/ body man and have it corrected as long as its the lighter 1967 H frame.
Have a good day.
Respectfully,
Henry Kunz 1534 H/SA