Thread: Subframe
View Single Post
Old 12-26-2022, 08:15 PM   #8
Jeff Kempton
Member
 
Jeff Kempton's Avatar
 
Join Date: Apr 2004
Location: Halifax, Nova Scotia, Canada
Posts: 236
Likes: 1,043
Liked 66 Times in 30 Posts
Default Re: Subframe

Quote:
Originally Posted by tolaas View Post
My front subframe are a little wrecked at left side,so my Camaro 67 are lower on that side, about 20mm on the rear.
If i bye a new one, AMD or OER, are they worth the money or are they badder then that one i alredy have?
Thank`s
Tolaas, my '67 Camaro has the early production subframe with no holes, as Dwight has described in his post. The most easily spotted difference that I've noticed between it and the '68-69 subframes is that the lower control arm snubbers were mounted on the subframe in '67 and contacted the rear edge of the arms, but were moved to the front and bolted to the lower control arms in '68-69.

I agree with the others that your frame can likely be repaired/straightened.
Jeff Kempton is offline   Reply With Quote