Quote:
Originally Posted by Woodfin
Tom, may not be a good idea to build such a package. I have plenty of options and was just thinking about the Vette. Removing the floor would be OK. Would doing so give room for an equal length four link? I do not want an unequal length bar setup.
|
If you remove the rear floor, particularly the storage and stepup area behind the seats you will be able to do an equal length bar ,but, they will be short. About 15-17" depending on the brackets . A lot of Vettes were built with the axle brackets locating the holes behind the axle centerline or at least on center to get a longer bar.
Old builds from the 70's and 80's were hard to adjust because almost everything was built with spacing for 3/4" bolts . going with modern spacing for 1/2" bolts will make the shorter bars easier to find a point that works.