CLASS RACER FORUM - View Single Post - Anti-Roll Bar

Dan Fahey · 09-07-2023, 02:03 PM

Thanks for the Advice

Have SS Rear and Front Springs, they are stiff.

When I bought the car new in 1995.
Took the car to Summit Point for Road Course practice.
Stayed with just about everything in the curves.
Straightaways were ok! Used up set up Front Disks.

The SS Roll Bar is 1.06 inch Diameter.
Trick Chassis makes a complete Anti Roll Bar set up, 1.56 dia.
Requires welding but says it can be bolted in.

Spohn makes a replacement SS Roll Bar from 4140 Chrome Moly.
36mm/1.496 inch diameter, 1/2 inch larger in diameter.

09-07-2023, 02:03 PM	#11
Dan Fahey VIP Member Join Date: Oct 2008 Posts: 2,128 Likes: 1,084 Liked 184 Times in 113 Posts	Re: Anti-Roll Bar Thanks for the Advice Have SS Rear and Front Springs, they are stiff. When I bought the car new in 1995. Took the car to Summit Point for Road Course practice. Stayed with just about everything in the curves. Straightaways were ok! Used up set up Front Disks. The SS Roll Bar is 1.06 inch Diameter. Trick Chassis makes a complete Anti Roll Bar set up, 1.56 dia. Requires welding but says it can be bolted in. Spohn makes a replacement SS Roll Bar from 4140 Chrome Moly. 36mm/1.496 inch diameter, 1/2 inch larger in diameter. Last edited by Dan Fahey; 09-07-2023 at 02:06 PM.