View Single Post
Old 02-06-2024, 09:15 AM   #28
Mike Pearson
VIP Member
 
Mike Pearson's Avatar
 
Join Date: Mar 2007
Posts: 2,473
Likes: 632
Liked 1,986 Times in 599 Posts
Default Re: Too Slow/Q-Jet question

Quote:
Originally Posted by Adger Smith View Post
I'm not a real Q-Jet tuner, but I question the 6.5 lb fuel pressure.
N/S area vs the small float
What do the experts say about that?
I have had Q-Jet customers that are very particular about regulator location and fuel line routing to the carb...
OK What you say Q-Jet experts??
6-6.5 PSI is what I run for fuel pressure. You need minimum 1 gallon of fuel delivery at the carb in less than 30 seconds. I run a Magna Fuel regulator dead head with #8 line from the cell to the carb. Regulator is mounted on the fenderwell I have one of those Chinese summit pumps that is similar to a holley blue pump. I have run 9.90 with my set up. My carb was built by Jim Boburka.
__________________
Mike Pearson 2485 SS
Mike Pearson is online now   Reply With Quote
Liked