CLASS RACER FORUM - View Single Post

Stan Weiss · 01-03-2025, 12:12 PM

I don't design cams. I do look at Cam Dr / Audie data. In this video Daniel Powell talks about .00033 as about max acceleration and the problem with this cam other than the noise is .00038 max acceleration.I don't own an Audie system. I do have a report from someone's Audie system for a BTR Stage 2 cam which shows Peak Open Acc. 0.000379. What have others seen?

Stan

This is a poor screen capture of the Erson cam that Eric used with his LS Cam Challenge engine . Which shows Peak Open Acc. 0.000384

01-03-2025, 12:12 PM	#1
Stan Weiss Senior Member Join Date: Apr 2020 Location: Phila, PA Posts: 792 Likes: 0 Liked 732 Times in 383 Posts	Cam Lobe Design I don't design cams. I do look at Cam Dr / Audie data. In this video Daniel Powell talks about .00033 as about max acceleration and the problem with this cam other than the noise is .00038 max acceleration.I don't own an Audie system. I do have a report from someone's Audie system for a BTR Stage 2 cam which shows Peak Open Acc. 0.000379. What have others seen? Stan This is a poor screen capture of the Erson cam that Eric used with his LS Cam Challenge engine . Which shows Peak Open Acc. 0.000384 Attached Thumbnails Last edited by Stan Weiss; 01-03-2025 at 12:30 PM. Reason: Added Audie Report for Erson Cam