CLASS RACER FORUM - View Single Post

Alan Warman · 09-11-2008, 01:04 AM

I'm trying to make him understand the new motor will be making more power.
So what worked before,might not work now.The old motor was a stock block 4-bolt main sbc
stock crank,pink rods SRP .030 pistons 13-1 and a fluidamper.Double hump heads 2.02 1.60 ported by God only knows who,and roller rockers 1.5.Victor JR intake 750 DP carb,Bullet solid cam in the 590 lift range.
The best it ran was 11.80s at 3400lbs at 3300 alt.The new motor will reuse block,crank,rocker arms,cam and intake and carb.New parts are Eagle 6" rods, Wiseco pistons,comp will be just a tad under 12-1.And a set of Dart Iron Eagle Platinum heads 230cc.I know the heads are a little to big but he can grow into them later.Better intake,carb,cam.

09-11-2008, 01:04 AM	#5
Alan Warman Member Join Date: May 2002 Location: San Angelo Tx Posts: 231 Likes: 0 Liked 0 Times in 0 Posts	Re: What balancers do you use I'm trying to make him understand the new motor will be making more power. So what worked before,might not work now.The old motor was a stock block 4-bolt main sbc stock crank,pink rods SRP .030 pistons 13-1 and a fluidamper.Double hump heads 2.02 1.60 ported by God only knows who,and roller rockers 1.5.Victor JR intake 750 DP carb,Bullet solid cam in the 590 lift range. The best it ran was 11.80s at 3400lbs at 3300 alt.The new motor will reuse block,crank,rocker arms,cam and intake and carb.New parts are Eagle 6" rods, Wiseco pistons,comp will be just a tad under 12-1.And a set of Dart Iron Eagle Platinum heads 230cc.I know the heads are a little to big but he can grow into them later.Better intake,carb,cam. __________________ Alan Warman STK 4107