Looks like Dennis has a solution for your height issue. The adjustable seat is easy to deal with;
This is what I?ve seen;
Weld a tube perpendicular on the cross bar centered on the seat. Fabricate a smaller tube that fits within the bigger tube with a plate on the end to bolt to the seat. Drill a hole through the tube welded onto the crossbar and holes as required in the tube/bracket that mounts to the seat for different seat positions. Then just put a bolt through it.
BUT be careful about the geometry of the whole thing try to make sure you get it on the same plane as your seat brackets.
Also I think some of the chassis guys sell a kit to do this.
Bill Edgeworth
6471 J/SA Firebird
__________________
Bill Edgeworth 6471 STK
|