CLASS RACER FORUM - View Single Post

JRyan · 01-01-2009, 12:43 AM

jmantle,

This was covered in an earlier thread, around 12/11/08, entitled "2009 NHRA Rules". Dave described what NHRA meant, but you're living proof of what I said about "the average guy is thinking about valve jobs as valve jobs", not the valve angle/deck surface relationship NHRA is refering too. If that's what they mean, then that's what they should say. Thanks!

Read the thread and see what you think.

Jerry

01-01-2009, 12:43 AM	#2
JRyan Senior Member Join Date: Apr 2003 Location: Aberdeen SD Posts: 645 Likes: 30 Liked 112 Times in 31 Posts	Re: Valve seat angles in stock jmantle, This was covered in an earlier thread, around 12/11/08, entitled "2009 NHRA Rules". Dave described what NHRA meant, but you're living proof of what I said about "the average guy is thinking about valve jobs as valve jobs", not the valve angle/deck surface relationship NHRA is refering too. If that's what they mean, then that's what they should say. Thanks! Read the thread and see what you think. Jerry