Need Moly Cage installed

Rob Petrie E395 · 12-13-2010, 06:35 AM

I am located in Southern IL about a hour East of St Louis. Car is a fourth gen F body. Anybody care to make a recomendation. I had it at a shop on the other side of St Louis for almost 6 months last winter/spring and they got nothing done on it. So I picked it up and it sat most of this year. Scheduled it to goto another shop and even gave them a depost back in early october. Was to be done middle of last month,. I am now looking for another shop. If I could tig weld worth a damn I would just get a wolf racecraft and put it in myself but I cant tig worth a damn and I want moly. I just need someone who wants to work, takes a little pride in what the finished product looks like and wont BS me on when they can do it and how long it will take. I am so frustrated with hauling this car all over to get nothing done.

Any help or suggestions would be greatly appreciated.

Mark Walton · 12-13-2010, 08:29 AM

Tim Mcamis Race Cars, just North of Warrenton, MO. Excellent work in a timely fashion.

X-TECH MAN · 12-13-2010, 08:40 AM

Quote:

Originally Posted by Rob Petrie E395

I am located in Southern IL about a hour East of St Louis. Car is a fourth gen F body. Anybody care to make a recomendation. I had it at a shop on the other side of St Louis for almost 6 months last winter/spring and they got nothing done on it. So I picked it up and it sat most of this year. Scheduled it to goto another shop and even gave them a depost back in early october. Was to be done middle of last month,. I am now looking for another shop. If I could tig weld worth a damn I would just get a wolf racecraft and put it in myself but I cant tig worth a damn and I want moly. I just need someone who wants to work, takes a little pride in what the finished product looks like and wont BS me on when they can do it and how long it will take. I am so frustrated with hauling this car all over to get nothing done.

Any help or suggestions would be greatly appreciated.

It may be a little far for you but you cant beat Ken Kier's work and it would have been finished long ago. .

Greg Hill · 12-13-2010, 09:54 AM

Pat and Andy Kroenenbitter at PK race cars in Columbus.

randy wilson · 12-13-2010, 10:04 AM

The best, and least expensive is LA Automotive in Toledo, I don't know if that's close enough for you. 419-247-0098.

K Stubbs · 12-13-2010, 12:12 PM

How far are you from Searcy Ark? I can show you pictures of mine (2000 Camaro) its chromoly tig welded, through the dash, and looks as good or better than anyone else's. I also did round tube chromoly subframes through the floor.

Rob Petrie E395 · 12-13-2010, 02:03 PM

Quote:

Originally Posted by K Stubbs

How far are you from Searcy Ark? I can show you pictures of mine (2000 Camaro) its chromoly tig welded, through the dash, and looks as good or better than anyone else's. I also did round tube chromoly subframes through the floor.

I hauled some cattle out of Bebe one time and it was 8 hr one way. Pictures to LMLamar70@yahoo.com
Thanks

denbreeden · 12-13-2010, 04:31 PM

B.R.C. Racecraft in Newburgh, IN owned by Matt Wright. He does excellent work, 10.5 cars, DP Challengers, etc. Newburg is by Evansville, IN. If you need his number send me a pm.

njk53 · 12-13-2010, 05:11 PM

Mike Pustelny in Michigan. Excellent fabricator and knows stock/superstock race car manufacture and set up. Well worth the trip to Michigan.

Rob Petrie E395 · 12-13-2010, 06:22 PM

Thank you to everyone thats posting. I have had this on another board for a while and got 2 leads that never answered the phone.

Started looking up numbers on the internet between customers today.

.

12-13-2010, 06:35 AM	#1
Rob Petrie E395 VIP Member Join Date: Dec 2007 Location: Woodlawn IL Posts: 1,092 Likes: 162 Liked 216 Times in 77 Posts	Need Moly Cage installed I am located in Southern IL about a hour East of St Louis. Car is a fourth gen F body. Anybody care to make a recomendation. I had it at a shop on the other side of St Louis for almost 6 months last winter/spring and they got nothing done on it. So I picked it up and it sat most of this year. Scheduled it to goto another shop and even gave them a depost back in early october. Was to be done middle of last month,. I am now looking for another shop. If I could tig weld worth a damn I would just get a wolf racecraft and put it in myself but I cant tig worth a damn and I want moly. I just need someone who wants to work, takes a little pride in what the finished product looks like and wont BS me on when they can do it and how long it will take. I am so frustrated with hauling this car all over to get nothing done. Any help or suggestions would be greatly appreciated.

12-13-2010, 08:29 AM	#2
Mark Walton Junior Member Join Date: Mar 2002 Location: Kansas Posts: 39 Likes: 0 Liked 0 Times in 0 Posts	Re: Need Moly Cage installed Tim Mcamis Race Cars, just North of Warrenton, MO. Excellent work in a timely fashion. __________________ Mark Walton 5789 SS, STK

12-13-2010, 09:54 AM	#4
Greg Hill VIP Member Join Date: May 2006 Location: Louisville , KY Posts: 1,995 Likes: 68 Liked 279 Times in 68 Posts	Re: Need Moly Cage installed Pat and Andy Kroenenbitter at PK race cars in Columbus. __________________ Greg Hill 4171 STK

12-13-2010, 10:04 AM	#5
randy wilson Senior Member Join Date: Jan 2007 Location: N/A Posts: 882 Likes: 0 Liked 22 Times in 22 Posts	Re: Need Moly Cage installed The best, and least expensive is LA Automotive in Toledo, I don't know if that's close enough for you. 419-247-0098. __________________ don,t have one

12-13-2010, 12:12 PM	#6
K Stubbs Member Join Date: Aug 2008 Location: Benton, Arkansas Posts: 402 Likes: 0 Liked 20 Times in 3 Posts	Re: Need Moly Cage installed How far are you from Searcy Ark? I can show you pictures of mine (2000 Camaro) its chromoly tig welded, through the dash, and looks as good or better than anyone else's. I also did round tube chromoly subframes through the floor.

12-13-2010, 04:31 PM	#8
denbreeden Senior Member Join Date: Jul 2010 Location: Plainville, IN Posts: 501 Likes: 147 Liked 61 Times in 26 Posts	Re: Need Moly Cage installed B.R.C. Racecraft in Newburgh, IN owned by Matt Wright. He does excellent work, 10.5 cars, DP Challengers, etc. Newburg is by Evansville, IN. If you need his number send me a pm.

12-13-2010, 05:11 PM	#9
njk53 Senior Member Join Date: Jul 2007 Location: East China, MI Posts: 504 Likes: 0 Liked 0 Times in 0 Posts	Re: Need Moly Cage installed Mike Pustelny in Michigan. Excellent fabricator and knows stock/superstock race car manufacture and set up. Well worth the trip to Michigan. __________________ Nelson Kowal Stock 345

12-13-2010, 06:22 PM	#10
Rob Petrie E395 VIP Member Join Date: Dec 2007 Location: Woodlawn IL Posts: 1,092 Likes: 162 Liked 216 Times in 77 Posts	Re: Need Moly Cage installed Thank you to everyone thats posting. I have had this on another board for a while and got 2 leads that never answered the phone. Started looking up numbers on the internet between customers today. .