Henry's Axles

Bubbba · 01-09-2013, 06:31 PM

Hi all.

I am led to believe that I have a set of Henry's axles, (35 spline). does anyone know what manufacturers spool will work with these?

thanks in advance

Ed M.
6181
H/SA

GTX JOHN · 01-09-2013, 07:10 PM

I think any axles that that are not Mark Williams "Involate Spline" type
35 will fit. All the other brands should be fine unless the were special
ordered custom with the MW style splines.
I would borrow a spool if you could find one and see if it goes in
without a big hammer!

Tom Goldman · 01-09-2013, 09:11 PM

Those are some old axles.
I don't think Henrys has made flanged axles for at least 20 years !
I've ocasionaly had 4WD customers bring components from them since they are still in business. http://henrysmachine.com/ call them and ask what angle spline they are.
Most likely they are 30deg like Strange. M-W is 45 deg.
Just a safety warning, years ago Henrys, Geise,and probably others made their axles 2 piece, welding the flange to the shaft and then heat treating.
OK for 300hp and 7" slicks,but today ?

01-09-2013, 06:31 PM	#1
Bubbba Junior Member Join Date: Jun 2007 Posts: 14 Likes: 1 Liked 0 Times in 0 Posts	Henry's Axles Hi all. I am led to believe that I have a set of Henry's axles, (35 spline). does anyone know what manufacturers spool will work with these? thanks in advance Ed M. 6181 H/SA

01-09-2013, 07:10 PM	#2
GTX JOHN VIP Member Join Date: Jun 2009 Location: Boulder City, Nevada 89005 Posts: 2,733 Likes: 2,802 Liked 2,486 Times in 697 Posts	Re: Henry's Axles I think any axles that that are not Mark Williams "Involate Spline" type 35 will fit. All the other brands should be fine unless the were special ordered custom with the MW style splines. I would borrow a spool if you could find one and see if it goes in without a big hammer!

01-09-2013, 09:11 PM	#3
Tom Goldman VIP Member Join Date: Jan 2003 Location: Allentown,PA Posts: 2,476 Likes: 889 Liked 882 Times in 236 Posts	Re: Henry's Axles Those are some old axles. I don't think Henrys has made flanged axles for at least 20 years ! I've ocasionaly had 4WD customers bring components from them since they are still in business. http://henrysmachine.com/ call them and ask what angle spline they are. Most likely they are 30deg like Strange. M-W is 45 deg. Just a safety warning, years ago Henrys, Geise,and probably others made their axles 2 piece, welding the flange to the shaft and then heat treating. OK for 300hp and 7" slicks,but today ? __________________ Tom Goldman 1500 SG , 1506 STK