9x30 M/T Radial

ss440gp · 01-30-2014, 01:46 PM

Can anybody tell me what actual section width is of the 3066R or 3067R M/T on 8.5 wheels or even 8". Trying to figure if these will fit on a lowered 70 chevelle. Thanks for any help.

Dion Hildebrandt · 01-30-2014, 02:11 PM

I run both slick #'s on my 70 chevelle ,but I have a 10" wide wheel. The back space on my rim is 5"...it should probably be 6", but there is a good amount of room at the top of the wheelwell. I do run my car fairly low, it isn't "slammed" by any means, and the only rubbing was due to the backspacing not being what it should be.

Hope this helps, I got my car all apart so actual numbers will be difficult to get at this point.

01-30-2014, 01:46 PM	#1
ss440gp Junior Member Join Date: Jan 2014 Posts: 1 Likes: 0 Liked 0 Times in 0 Posts	9x30 M/T Radial Can anybody tell me what actual section width is of the 3066R or 3067R M/T on 8.5 wheels or even 8". Trying to figure if these will fit on a lowered 70 chevelle. Thanks for any help.

01-30-2014, 02:11 PM	#2
Dion Hildebrandt Member Join Date: Nov 2008 Location: calgary alberta canada Posts: 383 Likes: 0 Liked 0 Times in 0 Posts	Re: 9x30 M/T Radial I run both slick #'s on my 70 chevelle ,but I have a 10" wide wheel. The back space on my rim is 5"...it should probably be 6", but there is a good amount of room at the top of the wheelwell. I do run my car fairly low, it isn't "slammed" by any means, and the only rubbing was due to the backspacing not being what it should be. Hope this helps, I got my car all apart so actual numbers will be difficult to get at this point. __________________ Dion Hildebrandt 6009 STK H/SA