|
![]() |
#1 |
Senior Member
Join Date: Jun 2011
Location: Langley (no igloos), British Columbia, Canada
Posts: 568
Likes: 307
Liked 281 Times in 86 Posts
|
![]()
Does anyone have the straight goods on Mission Raceway's current state?
|
![]() |
![]() |
![]() |
#2 |
Member
Join Date: Nov 2008
Location: calgary alberta canada
Posts: 383
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Their facebook page says they are blasting and grinding starting today, no racing until june
__________________
Dion Hildebrandt 6009 STK H/SA |
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Jul 2007
Posts: 124
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Progress has been good with the recent better weather. There are updated photos on Facebook showing the new concrete racing surface and asphalt shutdown area that is shared with the road course. My understanding is that finishing touches are being undertaken at this time, then there remain guardrails to move back into place, wiring up the timing equipment and a cleanup from the project. It will be great to see it completed and racing begin! Here's a link to the latest photos, etc.....
https://www.facebook.com/pages/Missi...k/311453515978 |
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Oct 2004
Location: Canada
Posts: 313
Likes: 0
Liked 6 Times in 2 Posts
|
![]()
Unless it's an announcement from the Mission Raceway website or their official Facebook page then everything else is just rumour and speculation. Neither is helpful nor believable so please avoid any spreading of stories.
The concrete pour took some time due to bad weather and it requires some fine tuning to be the best surface anywhere. The existing concrete is also getting media blasted from the start line to 660'. Washroom, concession, water line, road course and pit improvements are all happening at the same time so everyone needs to be patient.
__________________
Dale Posnick |
![]() |
![]() |
![]() |
#5 | |
Member
Join Date: Nov 2008
Location: calgary alberta canada
Posts: 383
Likes: 0
Liked 0 Times in 0 Posts
|
![]() Quote:
__________________
Dion Hildebrandt 6009 STK H/SA |
|
![]() |
![]() |
![]() |
#6 | |
Member
Join Date: Oct 2004
Location: Canada
Posts: 313
Likes: 0
Liked 6 Times in 2 Posts
|
![]() Quote:
New asphalt was put down past the finish line this week and the road race guys will run this Saturday. The entire 1/4 mile will be like new concrete when done then it needs to be dragged and prepped extensively. Going to take time but the racers will love it.
__________________
Dale Posnick |
|
![]() |
![]() |
![]() |
#7 | |
Member
Join Date: Nov 2008
Location: calgary alberta canada
Posts: 383
Likes: 0
Liked 0 Times in 0 Posts
|
![]() Quote:
![]()
__________________
Dion Hildebrandt 6009 STK H/SA |
|
![]() |
![]() |
![]() |
#8 |
Member
Join Date: Jul 2010
Posts: 127
Likes: 163
Liked 6 Times in 4 Posts
|
![]()
Mission Raceway is one of my favorite tracks, can not wait to go back up there this year !!!!!
|
![]() |
![]() |
![]() |
#9 |
Member
Join Date: Mar 2002
Posts: 306
Likes: 28
Liked 89 Times in 28 Posts
|
![]()
Any new updates?
|
![]() |
![]() |
![]() |
#10 |
Junior Member
Join Date: Nov 2008
Location: White Rock,bc canada
Posts: 70
Likes: 61
Liked 10 Times in 6 Posts
|
![]()
This is the most recent announcement from MRP as posted by Vicki Strell
on team on a mission website. See u in the lanes Posted by: VS (IP Logged) Date: May 04, 2014 11:49AM Brian Nawyn (President of BCCCA) has posted this below on Facebook. [www.facebook.com] Rumours: Interesting hearing all the rumours that are being spread about the Race Track Repairs at Mission Raceway Park. The first rumour is that the track is not going to open this year. This is totally Ridiculous. Another rumour is that the track has bumps up to 2 inches high in the new concrete. This is also incorrect. We have run into a few issues which will now be addressed The concrete in the right lane does have a variance on finish and flatness The spec is 3mil or 1/8 in. We have some spots that do vary from 4mil to 8 mil or 5/32 to 5/16. To fix this problem 8,000 shots were taken to find all the high areas. These spots have been digitally mapped and are being transfered to the race surface to be ground to spec. Upon completion the entire lane will be Shot Blasted. There was a delay of three weeks before the other lane was poured as we did not want a repeat of the issues in the right lane. The left lane was poured and was finished flat. Unfortunately the concrete was finished to soon and some air was trapped in the surface resulting in some Blistering. After thorough testing of the surface by different engineers these areas were mapped out that have the potential to spall and are currently being addressed. Once completed this lane will be ground very lightly and shot blasted so both lanes will be identical. While being delayed we also decided to do some work on the existing concrete. The old concrete that had a very smooth finish has recently been shot blasted. The concrete from the 60ft mark to the concrete that was just shot blasted is also being ground true and shot blasted. The estimated time line till completion is approximately 4-5 weeks weather dependant. This time line puts us right on the Divisional Race. Within the next couple of Days a Decision will be made Regarding the Divisional Race and the possibility of rescheduling it to a later date. Again we apologize for the delays of the 2014 race season. |
![]() |
![]() |
![]() |
|
|