|
![]() |
#1 |
Member
Join Date: Jan 2005
Location: North Massapequa, NY
Posts: 218
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
What is the cause of this? This is fresh oil with six 1/8 mile test hits. Amsoil 10 40. The oil looks black. the picture is right as I tilt the bucket to one side and let the oil flow to the side. You can see all this soot in the oil. Is it contamination from blow by as I did have a cylinder leaking down. I was just running e85 for the first time.
![]() |
![]() |
![]() |
![]() |
#2 |
Banned
Join Date: Nov 2014
Posts: 324
Likes: 625
Liked 179 Times in 89 Posts
|
![]()
Being no one answered my suggestion would be to get a sample and have it annualized.
When I use to deal with Black Bear in Farmingdale they'd run samples, no charge. Also you could ask at Motorworks, Sunrise Highway, Amityville if they'd do it for you. That's all I have! ![]() |
![]() |
![]() |
![]() |
#3 | |
Member
Join Date: Jan 2005
Location: North Massapequa, NY
Posts: 218
Likes: 0
Liked 0 Times in 0 Posts
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Mar 2016
Location: Crete, IL
Posts: 167
Likes: 254
Liked 54 Times in 24 Posts
|
![]()
Did you run a break in oil prior to putting the Amzoil in? Some of them, such as Driven BR will leave traces of dark oil suspension.
|
![]() |
![]() |
![]() |
#5 |
Member
Join Date: Jan 2005
Location: North Massapequa, NY
Posts: 218
Likes: 0
Liked 0 Times in 0 Posts
|
![]() |
![]() |
![]() |
![]() |
#6 | |
VIP Member
Join Date: Nov 2007
Location: New Jersey
Posts: 2,628
Likes: 160
Liked 758 Times in 379 Posts
|
![]() Quote:
Do a leak down first. |
|
![]() |
![]() |
![]() |
#7 | |
Member
Join Date: Feb 2007
Location: NORTHEAST
Posts: 287
Likes: 1
Liked 18 Times in 10 Posts
|
![]() Quote:
There are a lot of shops out there that do not believe in plate honing!!!! |
|
![]() |
![]() |
![]() |
#8 |
Member
Join Date: Jan 2005
Location: North Massapequa, NY
Posts: 218
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
If you read into my first post I said I had a cylinder leaking down. I did the test and found I had a problem. Pulled the head and had gouges in the cylinders causing the leak down. So when I drained the oil I found the sooty stuff in it. I just wanted to confirm it was combustion contamination in the oil. So I torn the motor down and will be pulling it shortly. I am in the process of building a new LS motor so timing was kind of ok in a messed up way.
|
![]() |
![]() |
![]() |
|
|