|
![]() |
#1 |
Senior Member
Join Date: Jun 2002
Location: Southern California
Posts: 559
Likes: 45
Liked 52 Times in 17 Posts
|
![]()
ON SALE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Car is a '99 model year but rums as a ’98 with the LT1, with a flat hood that puts it as a natural C car at 3390 or SS/JA at 3240. Change to a ram-air and it fits a bunch of other classes including GT. It’s a very versatile combination. Custom ballast weights will move it around a class or two. It's factory dark blue with tan cloth interior, T-tops, Grant wheel, looks really nice. In case you haven't noticed, cars like this will NEVER SPIN, garranted. RWR, Rick Watters/Tibor Kadar motor. Hedman headers MSD HSV coil and wires Holley crank trigger MSD distributor Complete Aeromotive fuel system, A1000 pump, regulator w/fuel filter aft and a strainer and nylon braided hoses (no rubber) CSR water pump with a spare VDO playback Tach Holley annhilitator ignition with spare Holley 950 ECU, with a spare , datalogging with O2 sensing. My program Moroso circuit breaker switch panel Strong, switchable one wire alternator T-action converter gone through by Munsinger T-action shifter E-Shift installed but not currently used 200 metric trans, auto 1-2 shift, deep alum pan with baffle and extended p/u, prepped by Leo Glassbrenner (Remac) with lots of his parts. Fuel cell and rear Optima battery, weight box Strange rear, 4.88 gears with special drum brakes, aluminum drums and soft linings. Lamb front brakes with S10 master, the rod cannot fall out! S&W rear anti-roll bar Chromemoly tubular rear trailing arms optimized for wheelbase. QA1 alum. Adjustable shocks front and rear. Centerline convo-pro, outdated but could be polishhed MT fronts and radial rears Aftermarket rack Electric windows with side bars removed from doors Custom black carpet with filled in floor Roll bar with swing out drivers side bar Several years ago the car was stripped to nothing and put back together that included: painting entire engine bay and underside gloss black then, re-engineered all brackets and plumbing routes. A complete color-coded re-wiring job from front to back with all soldered joints and weather-pak connectors plus much more to make it a really tidy package. Turnkey----$22,900.00 with the listed spares and I’m open to reasonable offers. Pics available at bonzaproducts@att.net Thx. B Ph. 951 686 4230
__________________
Bernie Cunningham 7053 STK Last edited by Bernie Cunningham; 11-01-2016 at 12:37 AM. |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jun 2002
Location: Southern California
Posts: 559
Likes: 45
Liked 52 Times in 17 Posts
|
![]()
Sold !!!!!!!!!!!
__________________
Bernie Cunningham 7053 STK |
![]() |
![]() |
![]() |
|
|