Building an 89GT Mustang

Stocker7403 · 08-16-2007, 11:04 PM

Ok i have a question? The car that we r building is an 1989 GT Mustang and the NHRA rated HP is 225.....I wanted to know should we clame it as an 89 or 1993. Because the 1993 HP from NHRA is 205 i think the car will fall into G/FIA or H/FIA.....If some one could help me out i would really be greatful....

Thanks

greg fulk · 08-17-2007, 02:52 AM

is it a mass air or speed density? the way to go is with the speed density 87-89 ..it's rated @ 215 and the mass air is 220. the 93 is factory 205 NHRA 220. oh and they are G/FIA add weight to H/FIA

Stocker7403 · 08-17-2007, 03:22 AM

Its a mass air car.... It wont be hard to switch it over from what my friends at Eaton tells me....What kind of computer should we use??? Holley Commander?

Thanks!

Gary Smith · 08-17-2007, 08:43 AM

My LX is an '89 but claim it as a '91 due to original NHRA weight minimums (now redundant with the new rule allowing to move to top of class weight.). NHRA doesn't differentiate between a MAF and a SD package. As you already know an '89 is a MAF system, mine has a Holley 950 adjustable SD system. Just about every 5.0 stocker uses aftermarket Speed Density or Alpha-N EFI setup. Evan Smith may be the only exception.

The only thing better than the various Mustang 5.0 combos are the people who run them. They are some of the nicest people around. Those who've guided me: Travis Gusso, Earle Holt, Jeff Swanson, Scott Demmy. Two of the biggest though have to be Bret Velde and David Lindsay (C/FI Cobra).

partsbob67 · 08-17-2007, 05:52 PM

i have been putting a 5.0 stocker together for about a year now. getting close . mine is a notchback and the biggest hurdle i have come across is getting to weigh enough for class. right now i am 250lbs light for g, and about 500 lbs light for h. i use the holley 950 and i am very happy with how easy it is to use and the results. i talked to lee valentine a couple of times and he has been very helpful. i got his number off of one of the 5.0 posts on this site. good luck with your car.

7423 · 08-17-2007, 07:54 PM

Hey PartsBob,
You need a copy of that new book "A virgins' guide to a quick and fast class car". There is a 50% dicount offer in the "general regulations" section titled BALLAST.
Win lites to ya Bob,
Charlie Allen

partsbob67 · 08-17-2007, 08:17 PM

LOL!!!! how's the back? ready to go racing soon?

7423 · 08-18-2007, 08:00 PM

I am SO MUCH better Bob, the surgery went well. Have to heal a bit and I'll be back.........

partsbob67 · 08-18-2007, 11:43 PM

that's great news! we need the master planner back as soon as possible

!!!

08-16-2007, 11:04 PM	#1
Stocker7403 Junior Member Join Date: Aug 2007 Posts: 4 Likes: 0 Liked 0 Times in 0 Posts	Building an 89GT Mustang Ok i have a question? The car that we r building is an 1989 GT Mustang and the NHRA rated HP is 225.....I wanted to know should we clame it as an 89 or 1993. Because the 1993 HP from NHRA is 205 i think the car will fall into G/FIA or H/FIA.....If some one could help me out i would really be greatful.... Thanks Last edited by Stocker7403; 08-16-2007 at 11:15 PM.

08-17-2007, 02:52 AM	#2
greg fulk VIP Member Join Date: Jan 2003 Location: jackson Posts: 1,165 Likes: 0 Liked 5 Times in 3 Posts	Re: Building an 89GT Mustang is it a mass air or speed density? the way to go is with the speed density 87-89 ..it's rated @ 215 and the mass air is 220. the 93 is factory 205 NHRA 220. oh and they are G/FIA add weight to H/FIA __________________ Greg Fulk 308 308X P/SA "ALL AMERICAN"

08-17-2007, 03:22 AM	#3
Stocker7403 Junior Member Join Date: Aug 2007 Posts: 4 Likes: 0 Liked 0 Times in 0 Posts	Re: Building an 89GT Mustang Its a mass air car.... It wont be hard to switch it over from what my friends at Eaton tells me....What kind of computer should we use??? Holley Commander? Thanks!

08-17-2007, 08:43 AM	#4
Gary Smith Senior Member Join Date: Jul 2007 Location: Greensboro, NC Posts: 820 Likes: 9 Liked 132 Times in 30 Posts	Re: Building an 89GT Mustang My LX is an '89 but claim it as a '91 due to original NHRA weight minimums (now redundant with the new rule allowing to move to top of class weight.). NHRA doesn't differentiate between a MAF and a SD package. As you already know an '89 is a MAF system, mine has a Holley 950 adjustable SD system. Just about every 5.0 stocker uses aftermarket Speed Density or Alpha-N EFI setup. Evan Smith may be the only exception. The only thing better than the various Mustang 5.0 combos are the people who run them. They are some of the nicest people around. Those who've guided me: Travis Gusso, Earle Holt, Jeff Swanson, Scott Demmy. Two of the biggest though have to be Bret Velde and David Lindsay (C/FI Cobra).

08-17-2007, 05:52 PM	#5
partsbob67 Member Join Date: Apr 2005 Location: rohnert park,ca Posts: 414 Likes: 11 Liked 78 Times in 11 Posts	Re: Building an 89GT Mustang i have been putting a 5.0 stocker together for about a year now. getting close . mine is a notchback and the biggest hurdle i have come across is getting to weigh enough for class. right now i am 250lbs light for g, and about 500 lbs light for h. i use the holley 950 and i am very happy with how easy it is to use and the results. i talked to lee valentine a couple of times and he has been very helpful. i got his number off of one of the 5.0 posts on this site. good luck with your car.

08-17-2007, 07:54 PM	#6
7423 Senior Member Join Date: Dec 2006 Posts: 639 Likes: 0 Liked 1 Time in 1 Post	Re: Building an 89GT Mustang Hey PartsBob, You need a copy of that new book "A virgins' guide to a quick and fast class car". There is a 50% dicount offer in the "general regulations" section titled BALLAST. Win lites to ya Bob, Charlie Allen

08-17-2007, 08:17 PM	#7
partsbob67 Member Join Date: Apr 2005 Location: rohnert park,ca Posts: 414 Likes: 11 Liked 78 Times in 11 Posts	Re: Building an 89GT Mustang LOL!!!! how's the back? ready to go racing soon?

08-18-2007, 08:00 PM	#8
7423 Senior Member Join Date: Dec 2006 Posts: 639 Likes: 0 Liked 1 Time in 1 Post	Re: Building an 89GT Mustang I am SO MUCH better Bob, the surgery went well. Have to heal a bit and I'll be back.........

08-18-2007, 11:43 PM	#9
partsbob67 Member Join Date: Apr 2005 Location: rohnert park,ca Posts: 414 Likes: 11 Liked 78 Times in 11 Posts	Re: Building an 89GT Mustang that's great news! we need the master planner back as soon as possible!!!