Jerico Front Bearing

Bobby Fazio · 02-21-2017, 04:26 PM

Does anyone know off hand if the Jerico front bearing, which measures 90mm outter, 40mm inner, and 23mm width, has SKF6308 NRJEM stamping on it? The one I pulled out of the spare trans I bought actually has SKF BBF-2308NRVBFS and needs to be replaced but Jerico assembly diagram calls for 6308NM - which seems very close to the SKF6308 NRJEM. I can get this fairly easily and quickly so it's the only reason I ask. Wondering if someone threw this other bearing in before selling.

MAURICE BLENDHEIM · 02-21-2017, 05:24 PM

Bobby…We've run up against this also. What we have learned is the Jobber Bearing has less Radial Load characteristics. The Jerico ball count is different internally (more). The Jerico Bearing is Proprietary and design specific, although the jobber is dimensionally correct it is inferior. MB.

Bobby Fazio · 02-21-2017, 07:31 PM

Ahh ok thanks.

02-21-2017, 04:26 PM	#1
Bobby Fazio VIP Member Join Date: Nov 2009 Location: Egg Harbor Township, NJ Posts: 1,463 Likes: 1,414 Liked 4,354 Times in 497 Posts	Jerico Front Bearing Does anyone know off hand if the Jerico front bearing, which measures 90mm outter, 40mm inner, and 23mm width, has SKF6308 NRJEM stamping on it? The one I pulled out of the spare trans I bought actually has SKF BBF-2308NRVBFS and needs to be replaced but Jerico assembly diagram calls for 6308NM - which seems very close to the SKF6308 NRJEM. I can get this fairly easily and quickly so it's the only reason I ask. Wondering if someone threw this other bearing in before selling. __________________ '65 Mustang SS/L & L/SA DriverInterviews.com \| App.DragInsights.com

02-21-2017, 05:24 PM	#2
MAURICE BLENDHEIM Senior Member Join Date: Jun 2011 Location: Langley (no igloos), British Columbia, Canada Posts: 565 Likes: 305 Liked 264 Times in 85 Posts	Re: Jerico Front Bearing Bobby…We've run up against this also. What we have learned is the Jobber Bearing has less Radial Load characteristics. The Jerico ball count is different internally (more). The Jerico Bearing is Proprietary and design specific, although the jobber is dimensionally correct it is inferior. MB. Last edited by MAURICE BLENDHEIM; 02-21-2017 at 05:28 PM.

02-21-2017, 07:31 PM	#3
Bobby Fazio VIP Member Join Date: Nov 2009 Location: Egg Harbor Township, NJ Posts: 1,463 Likes: 1,414 Liked 4,354 Times in 497 Posts	Re: Jerico Front Bearing Ahh ok thanks. __________________ '65 Mustang SS/L & L/SA DriverInterviews.com \| App.DragInsights.com