V10 viper / 727 combo help

R5ROB · 01-08-2018, 02:13 PM

Looking for suggestions on who could help out on getting parts to put a 727 behind a viper v10
Contacted ati with no luck they only make a adapter plate to bolt a gm trans on it
Car will be in gt so I can’t run a glide or 400
Any help would be greatly appreciated

jmcarter · 01-08-2018, 03:08 PM

Contact Kevin Helms, he’s built one or two of them.

Larry Hill · 01-09-2018, 08:09 AM

I think first V10's were glide cars. Dave at Pro Trans

R5ROB · 01-10-2018, 12:11 AM

Found a 727 that will work that came in the trucks for a couple years before they went to the 518 that all my good parts will work in
On the classracerinfo site it only gives hp rating with a stick at 450 hp no auto listed for the 97 488 v10
So Would it be rated the same with auto ?

GTX JOHN · 01-10-2018, 04:44 AM

I do not recall any year Viper ever coming with Auto = Therefore NOT legal
for stock class if that what you were planning.

R5ROB · 01-10-2018, 10:46 AM

Car is a super stock gt fwd conversion

Tim Kish · 01-10-2018, 01:25 PM

Quote:

Originally Posted by R5ROB

Car is a super stock gt fwd conversion

I'm intrigued. What FWD conversion chassis, with the lack of firewall relief for any Mopar RWD conversions, does a V10 fit in? Bellhousing adapter wise I though the V10 was the same bolt pattern as a small block but a little research it appears same as the Cummins instead.

Bob Bender · 01-10-2018, 04:19 PM

Please call Dave Collette 443-807-1569

Jeff Teuton · 01-10-2018, 05:01 PM

Depends what year motor you are looking at. The 488 bolt pattern will fit a 727 Early Diesel T/Flite I have two cases for that combo. Also depends how you plan on starting it. The later DP with the 513 motor has an an adapter for a GM Glide or T350 and both have different starting methods. Calll me @ 985-804-6161. I have a Viper with a t/f here that is for sale, and I had another. And can probably help you. Jeff Teuton or email jefft@southlanddodge.com

R5ROB · 01-10-2018, 07:29 PM

Thanks guys Got the trans covered now after talking with Jeff that has already done this

01-08-2018, 02:13 PM	#1
R5ROB Junior Member Join Date: Jan 2014 Location: Nw ohio Posts: 48 Likes: 1 Liked 3 Times in 3 Posts	V10 viper / 727 combo help Looking for suggestions on who could help out on getting parts to put a 727 behind a viper v10 Contacted ati with no luck they only make a adapter plate to bolt a gm trans on it Car will be in gt so I can’t run a glide or 400 Any help would be greatly appreciated

01-08-2018, 03:08 PM	#2
jmcarter VIP Member Join Date: Dec 2008 Location: Richmond Hill GA (and Port Ludlow WA) Posts: 4,273 Likes: 2,307 Liked 3,099 Times in 954 Posts	Re: V10 viper / 727 combo help Contact Kevin Helms, he’s built one or two of them. __________________ Jim Carter 2340 Super Stock 2340 SST/2340 Stock Set another place at the table

01-09-2018, 08:09 AM	#3
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,584 Likes: 1,869 Liked 10,583 Times in 2,187 Posts	Re: V10 viper / 727 combo help I think first V10's were glide cars. Dave at Pro Trans __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

01-10-2018, 12:11 AM	#4
R5ROB Junior Member Join Date: Jan 2014 Location: Nw ohio Posts: 48 Likes: 1 Liked 3 Times in 3 Posts	Re: V10 viper / 727 combo help Found a 727 that will work that came in the trucks for a couple years before they went to the 518 that all my good parts will work in On the classracerinfo site it only gives hp rating with a stick at 450 hp no auto listed for the 97 488 v10 So Would it be rated the same with auto ?

01-10-2018, 04:44 AM	#5
GTX JOHN VIP Member Join Date: Jun 2009 Location: Boulder City, Nevada 89005 Posts: 2,708 Likes: 2,734 Liked 2,399 Times in 679 Posts	Re: V10 viper / 727 combo help I do not recall any year Viper ever coming with Auto = Therefore NOT legal for stock class if that what you were planning. __________________ John Irving 741 Stock 741 Super Stock

01-10-2018, 10:46 AM	#6
R5ROB Junior Member Join Date: Jan 2014 Location: Nw ohio Posts: 48 Likes: 1 Liked 3 Times in 3 Posts	Re: V10 viper / 727 combo help Car is a super stock gt fwd conversion

01-10-2018, 04:19 PM	#8
Bob Bender VIP Member Join Date: Jan 2009 Location: Maryland Posts: 1,727 Likes: 1,589 Liked 452 Times in 88 Posts	Re: V10 viper / 727 combo help Please call Dave Collette 443-807-1569 __________________ Bob Bender 144 O/SA 2010-2012 National Record Holder

01-10-2018, 05:01 PM	#9
Jeff Teuton VIP Member Join Date: Jan 2002 Location: Houma, LA Posts: 2,717 Likes: 2 Liked 325 Times in 50 Posts	Re: V10 viper / 727 combo help Depends what year motor you are looking at. The 488 bolt pattern will fit a 727 Early Diesel T/Flite I have two cases for that combo. Also depends how you plan on starting it. The later DP with the 513 motor has an an adapter for a GM Glide or T350 and both have different starting methods. Calll me @ 985-804-6161. I have a Viper with a t/f here that is for sale, and I had another. And can probably help you. Jeff Teuton or email jefft@southlanddodge.com __________________ Jeff Teuton 4022 STK

01-10-2018, 07:29 PM	#10
R5ROB Junior Member Join Date: Jan 2014 Location: Nw ohio Posts: 48 Likes: 1 Liked 3 Times in 3 Posts	Re: V10 viper / 727 combo help Thanks guys Got the trans covered now after talking with Jeff that has already done this