Starters

Tom Meyer · 12-18-2022, 11:21 AM

Some where my starter got misplaced, what is everybody using now days? SBC 168 flex plate steffs kickout pan. Tom

Michael Compton · 12-18-2022, 11:31 AM

I use GPE starters out of OKC. Jared Swinehart (Owner) is a racer himself. Give him a call and he can hook you up!

Keith 944 · 12-18-2022, 01:33 PM

Meziere, great products and they pay contingency

Bob F · 12-18-2022, 08:45 PM

Tilton here

J&S Racing · 12-19-2022, 02:05 AM

RobbMC

Woodfin · 12-19-2022, 11:44 AM

Another good company is "House of Payne" a family shop that uses top quality parts and gives excellent service.

cad · 12-19-2022, 03:48 PM

House of Payne here.

Meziere may be too big depending on header fitment.....Id call and check before ordering.

Clark

Tom Meyer · 12-19-2022, 10:37 PM

Fenderwell headers just has to clear oil pan kickout. Low compression 283 don't take a lot to spin it over. Tom

John Duzac · 12-26-2022, 06:29 PM

I just bought a new Meziere starter for a 42 tooth flywheel. I had to wait about 3 weeks for the starter. But when the new starter arrived, it was beautiful. But when you consider I paid $960.00 for the starter, it should have been gold plated!

12-18-2022, 11:21 AM	#1
Tom Meyer Senior Member Join Date: Aug 2003 Location: Pierce NE Posts: 936 Likes: 77 Liked 351 Times in 120 Posts	Starters Some where my starter got misplaced, what is everybody using now days? SBC 168 flex plate steffs kickout pan. Tom __________________ Tom Meyer 5240 SS Stock ???

12-18-2022, 11:31 AM	#2
Michael Compton Member Join Date: Dec 2003 Location: Neosho, MO Posts: 215 Likes: 0 Liked 59 Times in 13 Posts	Re: Starters I use GPE starters out of OKC. Jared Swinehart (Owner) is a racer himself. Give him a call and he can hook you up!

12-18-2022, 01:33 PM	#3
Keith 944 VIP Member Join Date: Feb 2006 Location: Dela-where? Posts: 2,193 Likes: 1,160 Liked 1,874 Times in 576 Posts	Re: Starters Meziere, great products and they pay contingency __________________ KEITH MAYERS 2-1/2 X somebody Still many X nobody

12-18-2022, 08:45 PM	#4
Bob F Junior Member Join Date: Sep 2007 Location: Bucks Co Pa Posts: 74 Likes: 17 Liked 16 Times in 11 Posts	Re: Starters Tilton here

12-19-2022, 02:05 AM	#5
J&S Racing Member Join Date: Sep 2013 Posts: 283 Likes: 102 Liked 319 Times in 82 Posts	Re: Starters RobbMC

12-19-2022, 11:44 AM	#6
Woodfin Senior Member Join Date: Sep 2006 Location: Kilgore TX Posts: 531 Likes: 8 Liked 256 Times in 100 Posts	Re: Starters Another good company is "House of Payne" a family shop that uses top quality parts and gives excellent service.

12-19-2022, 03:48 PM	#7
cad Senior Member Join Date: Apr 2009 Location: Omaha, NE Posts: 700 Likes: 200 Liked 91 Times in 51 Posts	Re: Starters House of Payne here. Meziere may be too big depending on header fitment.....Id call and check before ordering. Clark

12-19-2022, 10:37 PM	#8
Tom Meyer Senior Member Join Date: Aug 2003 Location: Pierce NE Posts: 936 Likes: 77 Liked 351 Times in 120 Posts	Re: Starters Fenderwell headers just has to clear oil pan kickout. Low compression 283 don't take a lot to spin it over. Tom __________________ Tom Meyer 5240 SS Stock ???

12-26-2022, 06:29 PM	#9
John Duzac Member Join Date: May 2005 Location: Covington, La Posts: 311 Likes: 63 Liked 83 Times in 20 Posts	Re: Starters I just bought a new Meziere starter for a 42 tooth flywheel. I had to wait about 3 weeks for the starter. But when the new starter arrived, it was beautiful. But when you consider I paid $960.00 for the starter, it should have been gold plated! __________________ John Duzac D/S 4448 STK