|
![]() |
#1 |
Member
Join Date: Nov 2008
Posts: 304
Likes: 3
Liked 18 Times in 16 Posts
|
![]()
With the poor quality accelerator pumps currently found in carb kits, will a leather pump hold up with racing gas…renegade 112? 4gc on a super stocker. Thanks.
Ed |
![]() |
![]() |
![]() |
#2 |
VIP Member
Join Date: Feb 2002
Location: lyndon ky. ... louisville area
Posts: 1,308
Likes: 27
Liked 434 Times in 108 Posts
|
![]()
works with c11&12
capt
__________________
Jack McCarthy 3609 STK "the Captain" |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Nov 2005
Location: Pinckney, Michigan
Posts: 507
Likes: 394
Liked 261 Times in 68 Posts
|
![]()
I have run leather for years with no problems.
__________________
John Dinkel 3295 STK |
![]() |
![]() |
![]() |
#4 |
VIP Member
Join Date: Dec 2001
Location: Pontiac,il.
Posts: 1,183
Likes: 269
Liked 935 Times in 185 Posts
|
![]()
The trick used to be to soak your leather pump cups in brake fluid to keep them soft, or to soften them up. I use viton pump cups NAPA number 2-4112 in all my carbs .Cost about $7.50 each.
|
![]() |
![]() |
Liked |
![]() |
#5 |
Member
Join Date: Nov 2008
Posts: 304
Likes: 3
Liked 18 Times in 16 Posts
|
![]() |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Jul 2014
Posts: 569
Likes: 36
Liked 50 Times in 35 Posts
|
![]()
I’m thinking the alcohol eats the leather up along with fuel pumps and carbs but with race gas no
|
![]() |
![]() |
![]() |
#7 | |
Member
Join Date: Oct 2020
Posts: 269
Likes: 3,723
Liked 520 Times in 176 Posts
|
![]() Quote:
Does the 4 GC use the same size pump as the Rochester 2 Barrel or is it the Dia. of the Q-Jet pump? Its been years since I've been inside one of those carbs. Have a Good Day. Respectfully, Henry Kunz 1534 H/SA Last edited by Henrys Toy; 03-10-2024 at 09:10 AM. |
|
![]() |
![]() |
![]() |
#8 |
VIP Member
Join Date: Feb 2003
Location: Glendale, Arizona
Posts: 3,023
Likes: 706
Liked 1,514 Times in 563 Posts
|
![]()
All racing fuels contain Triethylamine.
They will kill the leather and even the Viton cups that usually come in the carb kits sold at auto parts stores. I recommend the use of cups sold by companies such as Quadarjet Power, Quadrajet Parts, and others. They sell cups that are resistant to the new generation of fuels and are made from either Butyl, EPDM, Neoprene, or Hypalon rubber. |
![]() |
![]() |
![]() |
#9 |
Member
Join Date: Nov 2008
Posts: 304
Likes: 3
Liked 18 Times in 16 Posts
|
![]()
Henry, the 4gc has a couple different sizes. The one I’m running (1966, 283/233hp) is 21/32” cup and the “long stem” pump. I’m not sure about the 2 barrel carb.
|
![]() |
![]() |
![]() |
#10 |
Junior Member
Join Date: Oct 2015
Posts: 60
Likes: 44
Liked 27 Times in 19 Posts
|
![]()
Not pitching for Cliff but he says his are alcohol proof.
|
![]() |
![]() |
![]() |
|
|