Super Stock Hemi Head Tech

Stan Weiss · 03-22-2024, 02:00 PM

Just how much doing you think these heads costs?

Stan

MAURICE BLENDHEIM · 03-24-2024, 12:25 PM

Stan... I'm guessing, complete with welding, port work all new hardware and ready to bolt on including JESEL rockers $22500.00 / pair. MB

FED 387 · 03-24-2024, 04:54 PM

Maurice I think you are a tad low---- probably like closer to $30 thousand

- along with at least a year wait time--and then you are not going to get the whole loaf probably less a slice---he is going to protect his regular customers who have been with him all along--FED 387

Dyno · 03-24-2024, 06:25 PM

Aluminum heads are what a group of us petitioned NHRA for 8 years or so ago. We were turned down. NHRA now allow the aluminum head but they are hard to find. The main reason was the heads are more repairable and easier for the head porter to work on. No one wants to work on old cast iron heads anymore! Plus us old guys have a hard time lifting the iron heads on and off the block.

FED 387 · 03-25-2024, 01:55 PM

Dyno ---since you have and race a Hemi would you care to share with the audience your best estimate for what a good set of complete race ready heads would cost--- not talking about pistons or intake manifold nor headers to work with the revised cylinder heads-- FED 387

Pauley · 03-25-2024, 03:55 PM

joe costello was zoned out early in this video. these dudes were over his head shortly after they said hemi.

ep-i like joe

Frank Castros · 03-25-2024, 07:16 PM

My guess was $25,000 but if Charlie Westcott still does Hemi heads and engines it's closer to at least 30k.

Alan Roehrich · 03-25-2024, 08:48 PM

I'm pretty sure at some point during the original presentation, Darin said a truly competitive Hemi Challenge engine would cost you around $100K. I'd guess heads, intake, and carburetors are more than half that.

James Hensler · 03-26-2024, 01:24 PM

I was under the impression that they cost 30k or very close to that ready to bolt on. The intake is 5k and the cam is 1550. A new set of 18-19 inch headers is 6k also

Stewart Way · 04-06-2024, 12:34 PM

If anyone is looking for a set or 2 of the Edelbrock heads message me or get in touch with Glenn Barnett on Facebook. Barnett has several. They also have them listed on Ebay.

03-22-2024, 02:00 PM	#1
Stan Weiss Senior Member Join Date: Apr 2020 Location: Phila, PA Posts: 793 Likes: 0 Liked 733 Times in 384 Posts	Super Stock Hemi Head Tech Just how much doing you think these heads costs? Stan

03-24-2024, 12:25 PM	#2
MAURICE BLENDHEIM Senior Member Join Date: Jun 2011 Location: Langley (no igloos), British Columbia, Canada Posts: 567 Likes: 306 Liked 278 Times in 86 Posts	Re: Super Stock Hemi Head Tech Stan... I'm guessing, complete with welding, port work all new hardware and ready to bolt on including JESEL rockers $22500.00 / pair. MB

03-24-2024, 04:54 PM	#3
FED 387 VIP Member Join Date: Jun 2006 Posts: 3,412 Likes: 510 Liked 329 Times in 177 Posts	Re: Super Stock Hemi Head Tech Maurice I think you are a tad low---- probably like closer to $30 thousand - along with at least a year wait time--and then you are not going to get the whole loaf probably less a slice---he is going to protect his regular customers who have been with him all along--FED 387

03-24-2024, 06:25 PM	#4
Dyno Senior Member Join Date: Dec 2002 Posts: 913 Likes: 1,124 Liked 679 Times in 202 Posts	Re: Super Stock Hemi Head Tech Aluminum heads are what a group of us petitioned NHRA for 8 years or so ago. We were turned down. NHRA now allow the aluminum head but they are hard to find. The main reason was the heads are more repairable and easier for the head porter to work on. No one wants to work on old cast iron heads anymore! Plus us old guys have a hard time lifting the iron heads on and off the block.

03-25-2024, 01:55 PM	#5
FED 387 VIP Member Join Date: Jun 2006 Posts: 3,412 Likes: 510 Liked 329 Times in 177 Posts	Re: Super Stock Hemi Head Tech Dyno ---since you have and race a Hemi would you care to share with the audience your best estimate for what a good set of complete race ready heads would cost--- not talking about pistons or intake manifold nor headers to work with the revised cylinder heads-- FED 387

03-25-2024, 03:55 PM	#6
Pauley Junior Member Join Date: Jan 2024 Posts: 54 Likes: 3 Liked 223 Times in 41 Posts	Re: Super Stock Hemi Head Tech joe costello was zoned out early in this video. these dudes were over his head shortly after they said hemi. ep-i like joe

03-25-2024, 07:16 PM	#7
Frank Castros VIP Member Join Date: Nov 2001 Location: The Lowcountry. Posts: 2,954 Likes: 2,536 Liked 2,610 Times in 948 Posts	Re: Super Stock Hemi Head Tech My guess was $25,000 but if Charlie Westcott still does Hemi heads and engines it's closer to at least 30k.

03-25-2024, 08:48 PM	#8
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,098 Likes: 1,550 Liked 1,778 Times in 404 Posts	Re: Super Stock Hemi Head Tech I'm pretty sure at some point during the original presentation, Darin said a truly competitive Hemi Challenge engine would cost you around $100K. I'd guess heads, intake, and carburetors are more than half that. __________________ Alan Roehrich 212A G/S

03-26-2024, 01:24 PM	#9
James Hensler Member Join Date: Apr 2022 Location: Noblesville,In Posts: 108 Likes: 7 Liked 58 Times in 36 Posts	Re: Super Stock Hemi Head Tech I was under the impression that they cost 30k or very close to that ready to bolt on. The intake is 5k and the cam is 1550. A new set of 18-19 inch headers is 6k also __________________ SS/AH 328X

04-06-2024, 12:34 PM	#10
Stewart Way Member Join Date: Aug 2003 Location: Atlanta Posts: 476 Likes: 20 Liked 70 Times in 22 Posts	Re: Super Stock Hemi Head Tech If anyone is looking for a set or 2 of the Edelbrock heads message me or get in touch with Glenn Barnett on Facebook. Barnett has several. They also have them listed on Ebay. __________________ Stewart Way 2424 SS