HOME FORUM RULES CONTACT
     
   
   

Go Back   CLASS RACER FORUM > Class Racer Forums > Stock and Super Stock Tech

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-08-2010, 09:14 AM   #1
L79racer
Member
 
L79racer's Avatar
 
Join Date: Jan 2005
Location: North Massapequa, NY
Posts: 218
Likes: 0
Liked 0 Times in 0 Posts
Default keeping front end too tight?

Would keeping the front end too tight slow your 60' down by not letting the front end lift and let the motor accelerate fast enough if it doesnt have enough power to shoot the car forward? I'm still working on getting my car to 60' better. best so far is a 1.42 but I think it should be easily in the mid high 1.30's. Car dead hooks with glide with 1.80 first gear and a 5500 stall converter. 4.56 rear gear and a 30" tire. It goes 10.00's @133 to 134mph. I have an I/C of 41 and 8.5 high. I'm thinking of pushing it out to about 47" long and 11" high and also loosening the front shocks. I thought it should be wheeling easily and I would be fighting to keep it on the ground but it only gets a little air under the tires. With a 98" wheel base and the engine set so far back in a corvette it should be going in the air. Any thoughts?? Here is how it leaves.

L79racer is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:58 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.