Rocker Arm question

Lonnie Cox · 04-06-2012, 11:15 PM

Does T & D make a Rocker legal for SBC stocker?

Alan Roehrich · 04-06-2012, 11:55 PM

I doubt it Lonnie, there's really no need. The new Comp black 7/16" stud rocker is fine for a small block, especially if you use the ARP Pro Series stud, and 3/8" x 0.125" wall Comp or Trend pushrods.

Andrew Hill · 04-07-2012, 12:16 AM

I heard they are making some, for BBCs I think, but they will be almost as expensive as their shaft rockers

Lee Valentine · 04-07-2012, 06:17 AM

jUST INSTALLED cOMP # 1804 BLACK ROCKERS ON MY LT-1,1.5X 7/16. GOING TO DYNO TODAY WILL POST HOW I MAKE OUT.

tj310 · 04-07-2012, 08:09 AM

I believe Jesel has a new very expensive looking stocker option.---Trevor

Jamie Greening · 04-08-2012, 05:34 PM

T&D are making rockers. They have bolt that bolts to stock location and has adjuster just like their shaft rockers. Call them up.

ron mattson · 04-09-2012, 12:05 PM

The T and D versions are made of unobtainium, as you cant get them!!! They have been
dragging their feet on this for 3 months, by the time they get them done the market will
be saturated with regular roller rockers!!!!

Lonnie Cox · 04-16-2012, 11:32 PM

went for the comps, waitng for summit

04-06-2012, 11:15 PM	#1
Lonnie Cox Junior Member Join Date: May 2010 Posts: 88 Likes: 0 Liked 0 Times in 0 Posts	Rocker Arm question Does T & D make a Rocker legal for SBC stocker?

04-06-2012, 11:55 PM	#2
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,115 Likes: 1,572 Liked 1,829 Times in 414 Posts	Re: Rocker Arm question I doubt it Lonnie, there's really no need. The new Comp black 7/16" stud rocker is fine for a small block, especially if you use the ARP Pro Series stud, and 3/8" x 0.125" wall Comp or Trend pushrods. __________________ Alan Roehrich 212A G/S

04-07-2012, 12:16 AM	#3
Andrew Hill Senior Member Join Date: Mar 2008 Location: Chicago, IL Posts: 701 Likes: 446 Liked 173 Times in 39 Posts	Re: Rocker Arm question I heard they are making some, for BBCs I think, but they will be almost as expensive as their shaft rockers __________________ 3207 D/SA, C/ED

04-07-2012, 06:17 AM	#4
Lee Valentine Senior Member Join Date: May 2004 Location: Brookfield, CT Posts: 708 Likes: 13 Liked 319 Times in 68 Posts	Re: Rocker Arm question jUST INSTALLED cOMP # 1804 BLACK ROCKERS ON MY LT-1,1.5X 7/16. GOING TO DYNO TODAY WILL POST HOW I MAKE OUT. __________________ Lee Valentine 1661 STK

04-07-2012, 08:09 AM	#5
tj310 Member Join Date: Sep 2009 Location: Dresden On. Canada Posts: 460 Likes: 0 Liked 0 Times in 0 Posts	Re: Rocker Arm question I believe Jesel has a new very expensive looking stocker option.---Trevor

04-08-2012, 05:34 PM	#6
Jamie Greening Junior Member Join Date: Jun 2007 Posts: 45 Likes: 0 Liked 0 Times in 0 Posts	Re: Rocker Arm question T&D are making rockers. They have bolt that bolts to stock location and has adjuster just like their shaft rockers. Call them up.

04-09-2012, 12:05 PM	#7
ron mattson Member Join Date: Nov 2005 Location: cloquet mn Posts: 466 Likes: 17 Liked 67 Times in 30 Posts	Re: Rocker Arm question The T and D versions are made of unobtainium, as you cant get them!!! They have been dragging their feet on this for 3 months, by the time they get them done the market will be saturated with regular roller rockers!!!! __________________ Ron Mattson 5015 STK

04-16-2012, 11:32 PM	#8
Lonnie Cox Junior Member Join Date: May 2010 Posts: 88 Likes: 0 Liked 0 Times in 0 Posts	Re: Rocker Arm question went for the comps, waitng for summit

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode