|
12-21-2014, 10:05 PM | #1 |
Junior Member
Join Date: Jul 2013
Location: Georgia,VT
Posts: 64
Likes: 0
Liked 0 Times in 0 Posts
|
1968 Dodge Dart Street Strip car
This is My 1968 Dart Project.
I bought it 2 years ago In ct. for $2,200 I originally Planned to just do a regular GTS clone with a 360 and mostly stock everything. I also did not intend on getting this deep in on this project. The car started out as a Original Paint Little old ladies 1968 dart with a running 225 slant in it, We tore the thing apart in no time and either sold or junked everything we are not going to use, (front suspension, Motor, Trans, Rear suspension ect ect. We have gotten It media blasted and it is soon to be on its way to the body shop. Heres the plan for it, 1968 Dart Built 340 (already have) 510hp Bulit TSR 727 trans with brake Tubular QA1 Mopar torsion bar K-Frame with all Tubular parts. 4 wheel Areospace disc Brakes Built Moser Dana 60 Complete Caltrac setup The car will be Mini tubbed with a 14 Inch tire on the back and skinnies up front. Now this dart is not a full time race call but WILL be taken to the track. Heres some pics, starting at the PO house
__________________
Tim Quintin - (driver) Cole Quintin- (Crew Chief 1970 Cuda S/G NHRA DIV 1 1970 Cuda S/ST NHRA DIV 1 |
12-21-2014, 10:09 PM | #2 |
Junior Member
Join Date: Jul 2013
Location: Georgia,VT
Posts: 64
Likes: 0
Liked 0 Times in 0 Posts
|
Re: 1968 Dodge Dart Street Strip car
More pics
__________________
Tim Quintin - (driver) Cole Quintin- (Crew Chief 1970 Cuda S/G NHRA DIV 1 1970 Cuda S/ST NHRA DIV 1 |
12-21-2014, 10:15 PM | #3 |
Junior Member
Join Date: Jul 2013
Location: Georgia,VT
Posts: 64
Likes: 0
Liked 0 Times in 0 Posts
|
Re: 1968 Dodge Dart Street Strip car
Heres a current list of the parts so far.
I am keeping track of the price it cost me, its my first resto so its kind of special. New Hotchkiss adjustable strut rods New AMD rear window trim New AMD drip rail trim New AMD right rear taillight support panel New front windshield trim clips New AMD front window trim New Billet fuel pump block off plate for small block mopar New AMD right and left full quarter panels New us car tool core support stiffener New us car tool inner fender braces. New PST leaf spring relocation kit New AMD trunk/quarter extensions New us car tool drive shaft loop New us car tool frame connectors New PST idler arm New PST pitman arm New PST inner and outer tie rod ends New High performance PST Tie rod sleeves Brand New door jamb windlace New AMD Inner splash shields New AMD door hinges Custom Built 340 Shortblock Current Invested - $9,422.16
__________________
Tim Quintin - (driver) Cole Quintin- (Crew Chief 1970 Cuda S/G NHRA DIV 1 1970 Cuda S/ST NHRA DIV 1 Last edited by Tim Quintin/Cole s/g; 01-20-2015 at 06:22 PM. |
12-21-2014, 11:28 PM | #4 |
VIP Member
Join Date: Oct 2013
Location: Gulf Breeze, FL
Posts: 1,655
Likes: 8
Liked 33 Times in 16 Posts
|
Re: 1968 Dodge Dart Street Strip car
Have fun with it, but if you keep tab on the costs you will get discouraged lol.
__________________
Rich Taylor I/SA - 321 |
12-21-2014, 11:39 PM | #5 | |
Junior Member
Join Date: Jul 2013
Location: Georgia,VT
Posts: 64
Likes: 0
Liked 0 Times in 0 Posts
|
Re: 1968 Dodge Dart Street Strip car
Quote:
maybe yes... Hopefully not....
__________________
Tim Quintin - (driver) Cole Quintin- (Crew Chief 1970 Cuda S/G NHRA DIV 1 1970 Cuda S/ST NHRA DIV 1 |
|
12-25-2014, 11:22 AM | #6 |
Junior Member
Join Date: Jul 2013
Location: Georgia,VT
Posts: 64
Likes: 0
Liked 0 Times in 0 Posts
|
Re: 1968 Dodge Dart Street Strip car
Got some work done to it ..
Got the wheel tubs a Out same as the trunk/quarter extensions and trimmed to the rails for the mini tub.... Should be able to fit a. 13-14 inch tire in there
__________________
Tim Quintin - (driver) Cole Quintin- (Crew Chief 1970 Cuda S/G NHRA DIV 1 1970 Cuda S/ST NHRA DIV 1 |
12-25-2014, 01:43 PM | #7 |
Member
Join Date: Oct 2011
Posts: 125
Likes: 47
Liked 21 Times in 9 Posts
|
Re: 1968 Dodge Dart Street Strip car
I like your project. It will be nice to follow along as you continue your build.
looks like your starting out with a solid car too. Best of luck! Jimmy |
01-11-2015, 09:19 PM | #8 |
Junior Member
Join Date: Jul 2013
Location: Georgia,VT
Posts: 64
Likes: 0
Liked 0 Times in 0 Posts
|
Re: 1968 Dodge Dart Street Strip car
Ok it's scheduled for the body shop Wednesday!! I can't wait . They are going to give it back to me after they get the doors finished,quarters on and finished, trunk/quarter extensions in , roof finished, trunk pan in and the and engine bay finished and all in epoxy primer.. We finished off some of the engine bay/inner fenders yesterday and seam sealed and primed the frame connectors/torque boxes. They quoted me $1,500 for all that work... By far the cheapest for the best. We had our stocker painted and quarters put on ect by them before and the end price was $4,800 and it looks better then the past shop we used to use that quoted $11,000. I got quoted $4,500 for my car done from this shop. It just amazes me you can get better work for less money. When we get it back it won't go back to the body shop until we have the car rolling with all new suspension, mock up engine and trans, wheels and tires , and everything else that we might have a problem with after it is painted. I'm shooting for June/early July in paint
__________________
Tim Quintin - (driver) Cole Quintin- (Crew Chief 1970 Cuda S/G NHRA DIV 1 1970 Cuda S/ST NHRA DIV 1 |
01-12-2015, 01:39 PM | #9 |
Junior Member
Join Date: Nov 2013
Location: NJ
Posts: 30
Likes: 0
Liked 0 Times in 0 Posts
|
Re: 1968 Dodge Dart Street Strip car
Like it . They are hard to find not crashed or rotted to death . Have fun !
|
01-20-2015, 06:21 PM | #10 |
Junior Member
Join Date: Jul 2013
Location: Georgia,VT
Posts: 64
Likes: 0
Liked 0 Times in 0 Posts
|
Re: 1968 Dodge Dart Street Strip car
Dart is Gone
Car is at the body shop and they are moving quickly ... Sold some more cars and parts and bought some for my dart... Just purchased the following .... Little over $1,400 shipped for the following A nice used cleaned A body dart center Link SPC Fully Adjustable Upper control arms. QA1 Lower tubular control arms QA1 Tubular K-Frame K-Frame and Lower arms are powder coated black and upper arms are power coated silver... New total - $10,813.52
__________________
Tim Quintin - (driver) Cole Quintin- (Crew Chief 1970 Cuda S/G NHRA DIV 1 1970 Cuda S/ST NHRA DIV 1 |
Thread Tools | |
Display Modes | |
|
|