Full Face Helmet Requirement---superstock

Rusty Davenport · 06-19-2008, 09:58 AM

Is the 9.99 or quicker rule for full face helmet requirement decided by the e.t.record in the class, the index, or the tech card question of the E.T. of the car ????

Mike Pearson · 06-19-2008, 10:05 AM

Rusty,

I heard it was by the ET of your car. Good question.

Did you ever sell the set of Neal heads that came with the Warren engine. Let me know.

Mike Pearson

Rusty Davenport · 06-19-2008, 10:24 AM

Yea, the heads are gone-----working on an equal challenge now-------the 441 head 294hp combination. My patience just isn't what it used to be.......I think I'm getting too old for experimentation hahahahaha !!!!!!!!

Mike Pearson · 06-19-2008, 12:11 PM

Im getting pretty old myself.... Putting a 327 275/300 combo in my camaro. I sold the 350 warren engine. Just some old parts to run in the new southern S/SS association races. Take Care

Mike

Rusty Davenport · 06-19-2008, 12:32 PM

Mike----Gene Daugherty switched over to that combination and it proved out to be a great thing and he is still getting faster. He has a set of heads that would be good for that combination if you don't want to spend a fortune. Good to hear from you.

Mike Pearson · 06-19-2008, 12:41 PM

Rusty,

Good to hear from you also. Do you have a contact number for Gene. I am interested in some parts.

Rusty Davenport · 06-19-2008, 02:11 PM

Gene Daughtery........540-387-4473 evenings

Ronnie Smith Jr · 06-19-2008, 08:28 PM

Mike,

What kind of parts are your interested in? I had the same combo in my car and have sold the car, motors and trans. I have 2 converters left plus misc Jesel rockers (new and dyno time) and other parts. Let me know if you have interest.

It's been a while since you ran the Camaro hasn't it? Good luck in getting it back together.

Ronnie, Jr.

Mike Pearson · 06-20-2008, 08:44 AM

Ronnie,

Its been almost 2 years since I ran the Camaro last. I was thinking about retiring but old habits die hard. I might be interested in a converter. I think the one I have will be too tight. I also a couple pairs of rockers. and some titanium retainers for triple spriings. Also need a carb. Give me a call or e-mail. Thanks.

Mike Pearson
813-433-4742
ssia2485@yahoo.com

06-19-2008, 09:58 AM	#1
Rusty Davenport Senior Member Join Date: Jun 2005 Location: Nashville N.C. Posts: 505 Likes: 4 Liked 100 Times in 26 Posts	Full Face Helmet Requirement---superstock Is the 9.99 or quicker rule for full face helmet requirement decided by the e.t.record in the class, the index, or the tech card question of the E.T. of the car ????

06-19-2008, 10:05 AM	#2
Mike Pearson VIP Member Join Date: Mar 2007 Posts: 2,417 Likes: 596 Liked 1,880 Times in 562 Posts	Re: Full Face Helmet Requirement---superstock Rusty, I heard it was by the ET of your car. Good question. Did you ever sell the set of Neal heads that came with the Warren engine. Let me know. Mike Pearson __________________ Mike Pearson 2485 SS

06-19-2008, 10:24 AM	#3
Rusty Davenport Senior Member Join Date: Jun 2005 Location: Nashville N.C. Posts: 505 Likes: 4 Liked 100 Times in 26 Posts	Re: Full Face Helmet Requirement---superstock Yea, the heads are gone-----working on an equal challenge now-------the 441 head 294hp combination. My patience just isn't what it used to be.......I think I'm getting too old for experimentation hahahahaha !!!!!!!!

06-19-2008, 12:11 PM	#4
Mike Pearson VIP Member Join Date: Mar 2007 Posts: 2,417 Likes: 596 Liked 1,880 Times in 562 Posts	Re: Full Face Helmet Requirement---superstock Im getting pretty old myself.... Putting a 327 275/300 combo in my camaro. I sold the 350 warren engine. Just some old parts to run in the new southern S/SS association races. Take Care Mike __________________ Mike Pearson 2485 SS

06-19-2008, 12:32 PM	#5
Rusty Davenport Senior Member Join Date: Jun 2005 Location: Nashville N.C. Posts: 505 Likes: 4 Liked 100 Times in 26 Posts	Re: Full Face Helmet Requirement---superstock Mike----Gene Daugherty switched over to that combination and it proved out to be a great thing and he is still getting faster. He has a set of heads that would be good for that combination if you don't want to spend a fortune. Good to hear from you.

06-19-2008, 12:41 PM	#6
Mike Pearson VIP Member Join Date: Mar 2007 Posts: 2,417 Likes: 596 Liked 1,880 Times in 562 Posts	Re: Full Face Helmet Requirement---superstock Rusty, Good to hear from you also. Do you have a contact number for Gene. I am interested in some parts. __________________ Mike Pearson 2485 SS

06-19-2008, 02:11 PM	#7
Rusty Davenport Senior Member Join Date: Jun 2005 Location: Nashville N.C. Posts: 505 Likes: 4 Liked 100 Times in 26 Posts	Re: Full Face Helmet Requirement---superstock Gene Daughtery........540-387-4473 evenings

06-19-2008, 08:28 PM	#8
Ronnie Smith Jr Member Join Date: Sep 2003 Location: Maryland Posts: 220 Likes: 0 Liked 0 Times in 0 Posts	Re: Full Face Helmet Requirement---superstock Mike, What kind of parts are your interested in? I had the same combo in my car and have sold the car, motors and trans. I have 2 converters left plus misc Jesel rockers (new and dyno time) and other parts. Let me know if you have interest. It's been a while since you ran the Camaro hasn't it? Good luck in getting it back together. Ronnie, Jr.

06-20-2008, 08:44 AM	#9
Mike Pearson VIP Member Join Date: Mar 2007 Posts: 2,417 Likes: 596 Liked 1,880 Times in 562 Posts	Re: Full Face Helmet Requirement---superstock Ronnie, Its been almost 2 years since I ran the Camaro last. I was thinking about retiring but old habits die hard. I might be interested in a converter. I think the one I have will be too tight. I also a couple pairs of rockers. and some titanium retainers for triple spriings. Also need a carb. Give me a call or e-mail. Thanks. Mike Pearson 813-433-4742 ssia2485@yahoo.com __________________ Mike Pearson 2485 SS