mod motor mustang stocker??

wesley montgomery · 11-04-2008, 05:13 PM

Does any body run a 99-04 mustang in stock or super stock with the 4.6 mod motor?? I am interested in seeing if one of these cars would be a viable combination in stock or super stock

Bill Harris · 11-04-2008, 05:25 PM

Bret Velde runs an 03 (I think) in A/S. It's the 4.6L supercharged rated at 390 HP.

wesley montgomery · 11-04-2008, 05:35 PM

thank you, do you know if anyone runs a n/a 2-v engine??

greg fulk · 11-04-2008, 06:07 PM

Rob Goins runs a 98 2 valve engine in stock

Fred Popov · 11-04-2008, 08:18 PM

I have not seen any 99 to 04 2V Mustang in Stock Eliminator. I think that a lot of racers are afraid to try to build a race car out of the Modular motor. The 2v modular heads don't flow that well, even the PI heads (99-04) NHRA also doesn't have the specs correct for that engine either. The year 99 valve lift is listed correctly at 505/534 but they messed up the 00 to 04. (280/295) They should be the same. If I were to build one I would build a 01 or later because they have a little more compression and the same factory horsepower rating.

wesley montgomery · 11-04-2008, 08:20 PM

thanks for all the info, maybe i should rethink using that car as a base

Fred Popov · 11-04-2008, 08:59 PM

I like the 4 Valve DOHC Modular engines on the 96 to 98 Cobras. Stock the DOHC heads flow very well, even better then the LT1s and LS1s. The aluminum block is very strong with 6 bolt mains. I think that it would make a great high-winding engine. The only problem would be at tear-down. It would take more time to take appart.

Just Observing · 11-04-2008, 09:51 PM

Only thing about the cobra 4valve is it is a stick only combo correct?

Fred Popov · 11-04-2008, 10:06 PM

Quote:

Originally Posted by Just Observing

Only thing about the cobra 4valve is it is a stick only combo correct?

Yes, stick only.

Stang_Bang · 11-04-2008, 11:18 PM

What about a 03-04 Mach 1??? 305 HP 4 valve and I think they came auto.....

Arjay

11-04-2008, 05:13 PM	#1
wesley montgomery Junior Member Join Date: Apr 2005 Posts: 7 Likes: 0 Liked 0 Times in 0 Posts	mod motor mustang stocker?? Does any body run a 99-04 mustang in stock or super stock with the 4.6 mod motor?? I am interested in seeing if one of these cars would be a viable combination in stock or super stock

11-04-2008, 05:25 PM	#2
Bill Harris Member Join Date: Mar 2002 Location: Ooltewah, TN Posts: 421 Likes: 13 Liked 26 Times in 13 Posts	Re: mod motor mustang stocker?? Bret Velde runs an 03 (I think) in A/S. It's the 4.6L supercharged rated at 390 HP. __________________ Bill Harris ex 2172 STK ex 2272 S/S

11-04-2008, 05:35 PM	#3
wesley montgomery Junior Member Join Date: Apr 2005 Posts: 7 Likes: 0 Liked 0 Times in 0 Posts	Re: mod motor mustang stocker?? thank you, do you know if anyone runs a n/a 2-v engine??

11-04-2008, 06:07 PM	#4
greg fulk VIP Member Join Date: Jan 2003 Location: jackson Posts: 1,165 Likes: 0 Liked 5 Times in 3 Posts	Re: mod motor mustang stocker?? Rob Goins runs a 98 2 valve engine in stock __________________ Greg Fulk 308 308X P/SA "ALL AMERICAN"

11-04-2008, 08:18 PM	#5
Fred Popov Junior Member Join Date: Sep 2007 Location: Chesapeake, VA Posts: 64 Likes: 0 Liked 0 Times in 0 Posts	Re: mod motor mustang stocker?? I have not seen any 99 to 04 2V Mustang in Stock Eliminator. I think that a lot of racers are afraid to try to build a race car out of the Modular motor. The 2v modular heads don't flow that well, even the PI heads (99-04) NHRA also doesn't have the specs correct for that engine either. The year 99 valve lift is listed correctly at 505/534 but they messed up the 00 to 04. (280/295) They should be the same. If I were to build one I would build a 01 or later because they have a little more compression and the same factory horsepower rating.

11-04-2008, 08:20 PM	#6
wesley montgomery Junior Member Join Date: Apr 2005 Posts: 7 Likes: 0 Liked 0 Times in 0 Posts	Re: mod motor mustang stocker?? thanks for all the info, maybe i should rethink using that car as a base

11-04-2008, 08:59 PM	#7
Fred Popov Junior Member Join Date: Sep 2007 Location: Chesapeake, VA Posts: 64 Likes: 0 Liked 0 Times in 0 Posts	Re: mod motor mustang stocker?? I like the 4 Valve DOHC Modular engines on the 96 to 98 Cobras. Stock the DOHC heads flow very well, even better then the LT1s and LS1s. The aluminum block is very strong with 6 bolt mains. I think that it would make a great high-winding engine. The only problem would be at tear-down. It would take more time to take appart.

11-04-2008, 09:51 PM	#8
Just Observing Member Join Date: Mar 2007 Posts: 138 Likes: 0 Liked 0 Times in 0 Posts	Re: mod motor mustang stocker?? Only thing about the cobra 4valve is it is a stick only combo correct?

11-04-2008, 11:18 PM	#10
Stang_Bang Junior Member Join Date: Oct 2007 Posts: 30 Likes: 1 Liked 2 Times in 1 Post	Re: mod motor mustang stocker?? What about a 03-04 Mach 1??? 305 HP 4 valve and I think they came auto..... Arjay