Racing Parts Garage Sale: These parts must go!

cutta · 12-31-2008, 01:59 PM

1.) TCI 9" Racing Torque Converter: 4800 rpm flash stall

This is a very nice Torque converter that was purchased from TCI.The converter only has a few runs since refreshened, so this piece is virtually new. We have seen our best ET and MPH with this converter and have the time slips to prove. We purchased the converter new for over $800 dollars and we will sell it for $400 (free shipping to most states). That's less the half the cost of most new converters! Don't miss out on this great deal.

To be used with Torqueflite Transmissions only!

It can be yours for: $400

2.) Mopar Big Block Closed Chamber Cylinder Heads:

These are some very nice early model cylinder head castings from Mopar that will fit well in a restoration project or any race project. They feature closed combustion chambers and provide great airflow for street to mild racing applications. Even though these cylinder heads feature a smaller valve size, they have the capability to be enlarged to the more common 1.74 or 1.81 exhaust valves used in other racing applications. We have also taken very good care of these heads while in our possesion by keeping them in a cool dry storage area. We have also taken them to our local machine shop to have them magnafluxed(for cracks) and cleaned. These heads are ready to go, you just need to have your valvetrain installed and your ready to zip up and down the street or head to the strip, plus free shipping to most locations! Yes, free shipping to most locations.

Mopar Casting Number: 2406516

Feature Closed Combustion Chambers

2.08 Intake, 1.60 Exhaust

YOU CAN HAVE IT ALL FOR: $200

3.) Richmond Gear Ring and Pinion Set for 9" Ford rear end: 5.43 Ratio ( part no. 69-0069-1)

This set of gears only have four runs on them since new so they are essentially new. We have stored them in a cool dry storage space to ensure longevity. These gears are in excellent condition and we will let them go for $165. We will even split shipping cost with the buyer. These gears costs over $200 new from jegs. This is a steal!

YOU CAN HAVE IT ALL FOR: $165

If you have any questions about any of the parts above, please email me at adrielparadise@yahoo.com or send me a PM. Pictures available upon request.

12-31-2008, 01:59 PM	#1
cutta Member Join Date: Jul 2008 Location: Little Rock, AR Posts: 347 Likes: 0 Liked 5 Times in 2 Posts	Racing Parts Garage Sale: These parts must go! 1.) TCI 9" Racing Torque Converter: 4800 rpm flash stall This is a very nice Torque converter that was purchased from TCI.The converter only has a few runs since refreshened, so this piece is virtually new. We have seen our best ET and MPH with this converter and have the time slips to prove. We purchased the converter new for over $800 dollars and we will sell it for $400 (free shipping to most states). That's less the half the cost of most new converters! Don't miss out on this great deal. To be used with Torqueflite Transmissions only! It can be yours for: $400 2.) Mopar Big Block Closed Chamber Cylinder Heads: These are some very nice early model cylinder head castings from Mopar that will fit well in a restoration project or any race project. They feature closed combustion chambers and provide great airflow for street to mild racing applications. Even though these cylinder heads feature a smaller valve size, they have the capability to be enlarged to the more common 1.74 or 1.81 exhaust valves used in other racing applications. We have also taken very good care of these heads while in our possesion by keeping them in a cool dry storage area. We have also taken them to our local machine shop to have them magnafluxed(for cracks) and cleaned. These heads are ready to go, you just need to have your valvetrain installed and your ready to zip up and down the street or head to the strip, plus free shipping to most locations! Yes, free shipping to most locations. Mopar Casting Number: 2406516 Feature Closed Combustion Chambers 2.08 Intake, 1.60 Exhaust YOU CAN HAVE IT ALL FOR: $200 3.) Richmond Gear Ring and Pinion Set for 9" Ford rear end: 5.43 Ratio ( part no. 69-0069-1) This set of gears only have four runs on them since new so they are essentially new. We have stored them in a cool dry storage space to ensure longevity. These gears are in excellent condition and we will let them go for $165. We will even split shipping cost with the buyer. These gears costs over $200 new from jegs. This is a steal! YOU CAN HAVE IT ALL FOR: $165 If you have any questions about any of the parts above, please email me at adrielparadise@yahoo.com or send me a PM. Pictures available upon request.