wanted, SBC 3.562 stroke shaft

Dragsinger · 08-08-2009, 05:44 AM

In need of a 3.562 stroke SBC crank with 2" rod pin [my first choice but will consider other options] Let me know what you have.

Jason Leindecker · 08-17-2009, 11:52 AM

I have a GM forging #2690 (67-85 350) with .020 under large journal mains and std. small journal rods. Crank was storked to 3.562. It was mag'd and polished 12-15-08. The journal sizes and strokes are as follows:
Mains / Rods / Stroke
1= 2.4283 1/2= 1.9989 1/2= 3.563
2= 2.4283 3/4= 1.9987 3/4= 3.562
3= 2.4284 5/6= 1.9984 5/6= 3.563
4= 2.4283 7/8= 1.9985 7/8= 3.562
5= 2.4281
Crank has factory balance holes in the counter weights and was never re-balanced.

Shop number 610-798-9220

08-08-2009, 05:44 AM	#1
Dragsinger VIP Member Join Date: Jul 2008 Location: Liberty City [East Texas] Posts: 1,760 Likes: 5 Liked 99 Times in 60 Posts	wanted, SBC 3.562 stroke shaft In need of a 3.562 stroke SBC crank with 2" rod pin [my first choice but will consider other options] Let me know what you have. __________________ Larry Woodfin 471W

08-17-2009, 11:52 AM	#2
Jason Leindecker Junior Member Join Date: Feb 2006 Location: Center Valley, PA Posts: 18 Likes: 0 Liked 0 Times in 0 Posts	Re: wanted, SBC 3.562 stroke shaft I have a GM forging #2690 (67-85 350) with .020 under large journal mains and std. small journal rods. Crank was storked to 3.562. It was mag'd and polished 12-15-08. The journal sizes and strokes are as follows: Mains / Rods / Stroke 1= 2.4283 1/2= 1.9989 1/2= 3.563 2= 2.4283 3/4= 1.9987 3/4= 3.562 3= 2.4284 5/6= 1.9984 5/6= 3.563 4= 2.4283 7/8= 1.9985 7/8= 3.562 5= 2.4281 Crank has factory balance holes in the counter weights and was never re-balanced. Shop number 610-798-9220 __________________ Jason Leindecker