|
![]() |
#1 |
VIP Member
Join Date: Sep 2009
Location: Barberton Ohio
Posts: 1,114
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Has anyone had and experience and KNOW a good source for Custom Split Y spark plug wires for about a 60kv per plug (120kv source) ?
I used to have a source for Motorcycles but they are gone now about 5 years. The car has COP and Im using the LS2 Truck coil it has Dual Plug heads and its a Hemi so its to my advantage to run both plugs. Since the rules state Stock number of coils , I cant do what I wanted and run 16 coils. So......I need to split it. A good vendor for a custom make on these, a lot of the "big" guys, Oh we wont do that, or cant ? I mean come on..... Cheers Chris Last edited by Chris "drooze" Wertman; 12-19-2009 at 11:59 AM. Reason: fixed spelling errors....well a few |
![]() |
![]() |
![]() |
#2 |
VIP Member
Join Date: Apr 2003
Location: Tulsa, Oklahoma
Posts: 1,669
Likes: 3,855
Liked 800 Times in 337 Posts
|
![]() |
![]() |
![]() |
![]() |
#3 | |
VIP Member
Join Date: Sep 2009
Location: Barberton Ohio
Posts: 1,114
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Thanks, didnt see your response Ill give em a call....the issue is with the higher voltage (120k split 60k a side) and the insulation, noone make a connector for the modern wires , or a boot for 3.......
Uhgggggg.....Im litterally drilling a mold today to make the split Y boots and run a 3 connector Y Im brazing out of brass allthread....but Im gonna hold and see if theyve got anyting I really dont want to do this times 20.....2 sets and a few spares.... Thanks. Quote:
|
|
![]() |
![]() |
![]() |
|
|