Need Ford parts for my new motor.. Let me know if you have:

[Bobby Fazio]

Building a new motor for my bracket 1990 Mustang 5.0 (302 block with 351W heads). Before I buy all new stuff maybe someone has these:

1. Set of Forged Alum Pistons, 4.030 bore, flat top with 2 valve reliefs. 3.00" stroke and 5.090" rod length. Tall order I know.

2. Set of 30lb injectors

3. 70mm throttle body to go with my Edelbrock Performer RPM intake.

I will need more, I'm gonna go with Chevy valves for these 351W heads but I'm not totally sure on their size yet. As soon as my awesome engine, trans, and rear builder (dad) let's me know I will post it. Thanks guys!

[Tom Turner]

Bobby; I have a 3811 Edelbrock 70mm T-body; new in box. $225. Call if you want it. 1 888 927 2079 toll free or my e-mail is KVIAUTOGUY@aol.com. TT

[Bobby Fazio]

That's for Honda/Acura no?

[Tom Turner]

No; the throttle body is actually for Ford and has the 5.0 bolt pattern. Comes with an adapter for the rice racers. It's a high quality piece and is exactly what you want. TT

[John Presing]

if it is any help i have a fresh 035 small done piston 302 for brackets built by bill ceralli here in paterson nj this is a short block only i do have 351w heads for this engine but not done & torker manifold 1500.00 for the short block will talk about the rest .thanks call 973 427 3673 k/s&c/s 1428 john presing .

[Bobby Fazio]

Originally Posted by John Presing

if it is any help i have a fresh 035 small done piston 302 for brackets built by bill ceralli here in paterson nj this is a short block only i do have 351w heads for this engine but not done & torker manifold 1500.00 for the short block will talk about the rest .thanks call 973 427 3673 k/s&c/s 1428 john presing .

John I have the heads already and the block and manifold, just need a set of pistons but .035 dome pistons may be a little too much compression for me and I drive the car to and from the tracks. But I'll call ya anyway.