|
![]() |
#1 |
Junior Member
Join Date: Apr 2009
Posts: 13
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Had my c4 rebuilt and the car won't accelerate past 5000 rpm in first gear second and third it goes to 7500 rpm no problem.
Sixty foot times are also way off normally low 1.50 now 2.00 any ideas. THANKS. |
![]() |
![]() |
![]() |
#2 |
Member
Join Date: Mar 2002
Location: Ooltewah, TN
Posts: 421
Likes: 13
Liked 26 Times in 13 Posts
|
![]()
Check the intermediate band adjustment. If it's too tight it will drag badly on the high gear drum that is turning about 85% of the input RPM, but the opposite direction.
__________________
Bill Harris ex 2172 STK ex 2272 S/S |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Feb 2002
Location: Southeast Michigan
Posts: 905
Likes: 69
Liked 237 Times in 112 Posts
|
![]()
Sounds like the high gear clutches are centrifugally applying in first gear. This could be caused by trapped oil behind the high gear piston, or a cross leak into the high gear clutch circuit.
|
![]() |
![]() |
![]() |
#4 |
Junior Member
Join Date: Apr 2009
Posts: 13
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Bill and ss3011 thanks for your replies
|
![]() |
![]() |
![]() |
|
|