427 shortblock

6682Bktrcr · 04-15-2007, 10:17 PM

427 060 4 bolt main with ARP studs
GM steel crank
GM 7/16 rods ARP bolts
Mellings oil pump with baffle
Milodon windage tray
Moroso pan
Ultradyne roller cam 710 Intake 710 Ex 304 Int 314 Exh 110 LSA
Comp Cams Roller lifters
Comp Cams Rev kit
7/16 pushrods
Cloyes Double Roller Timing Chain
AtI Balancer
Hays Flexplate
12-1 Manley Pistons
ARP Head studs
I am throwing in a set of closed chamber heads square port heads,Ferrara valves K-motion springs 10 deg locks.One of the heads has a pinhole in the exhaust port that goes into the waterjacket.I know there are guys that can repair stuff like this.
All the parts have 25 passes on themand were bought new
I also have a Team G with some mild porting and a Brodix Turtle installed
Avanti TRC preped 850 Carb
I am asking $4400 for the short block OBO
I will only sell the Manifold and carb once the shortblock is sold
This combo went 10 teens in a 3000# car I was having problems with the suspensio(4 link) I am sure it would of went faster once I sorted it out
Thanks for looking
cell 631-379-2128

Louie

6682Bktrcr · 04-16-2007, 12:02 PM

P.S. heads were ported and polished by Brandywine Cyl heads.If someone can repair that port they will have a nice set of heads.Im going heads up racing otherwise I would of had them fixed

Louie

6682Bktrcr · 04-24-2007, 07:49 AM

Need to clean out garage I will throw in the manifold and the carb.
Take all for $3700 .Lets deal !!

Louie

04-15-2007, 10:17 PM	#1
6682Bktrcr Junior Member Join Date: Sep 2006 Location: Nesconset New York Posts: 21 Likes: 0 Liked 0 Times in 0 Posts	427 shortblock 427 060 4 bolt main with ARP studs GM steel crank GM 7/16 rods ARP bolts Mellings oil pump with baffle Milodon windage tray Moroso pan Ultradyne roller cam 710 Intake 710 Ex 304 Int 314 Exh 110 LSA Comp Cams Roller lifters Comp Cams Rev kit 7/16 pushrods Cloyes Double Roller Timing Chain AtI Balancer Hays Flexplate 12-1 Manley Pistons ARP Head studs I am throwing in a set of closed chamber heads square port heads,Ferrara valves K-motion springs 10 deg locks.One of the heads has a pinhole in the exhaust port that goes into the waterjacket.I know there are guys that can repair stuff like this. All the parts have 25 passes on themand were bought new I also have a Team G with some mild porting and a Brodix Turtle installed Avanti TRC preped 850 Carb I am asking $4400 for the short block OBO I will only sell the Manifold and carb once the shortblock is sold This combo went 10 teens in a 3000# car I was having problems with the suspensio(4 link) I am sure it would of went faster once I sorted it out Thanks for looking cell 631-379-2128 Louie

04-16-2007, 12:02 PM	#2
6682Bktrcr Junior Member Join Date: Sep 2006 Location: Nesconset New York Posts: 21 Likes: 0 Liked 0 Times in 0 Posts	P.S. heads were ported and polished by Brandywine Cyl heads.If someone can repair that port they will have a nice set of heads.Im going heads up racing otherwise I would of had them fixed Louie

04-24-2007, 07:49 AM	#3
6682Bktrcr Junior Member Join Date: Sep 2006 Location: Nesconset New York Posts: 21 Likes: 0 Liked 0 Times in 0 Posts	Need to clean out garage I will throw in the manifold and the carb. Take all for $3700 .Lets deal !! Louie