Small ratio rockers

Tom Meyer · 01-19-2017, 09:07 AM

Where do you find small ratio rocker for cam break in for SBC. Thanks Tom

cad · 01-19-2017, 09:12 AM

Tom,
Jegs:
http://www.jegs.com/webapp/wcs/store...rsistYmm=false

Or, Speedway should have them.

Clark

Robert Simpson · 01-19-2017, 09:26 AM

Competition Products sells them through Howard Cams. Not bad looking at all. 1.3 ratio I think.

Robert

Alan Nyhus · 01-19-2017, 09:34 AM

Tom, Speedways 'house brand' are pretty reasonably priced.

http://www.speedwaymotors.com/Search?query=1.3+rockers

Jim Hanig · 01-19-2017, 10:59 AM

Quote:

Originally Posted by Tom Meyer

Where do you find small ratio rocker for cam break in for SBC. Thanks Tom

If you use them check for push rod clearance at pre asemble..

carl hinkson · 01-19-2017, 12:39 PM

I have crower 1.2and 3.5 ratio and during cylinder head machining the push rod holes may have to elongated to except those rockers.

It maybe easier to remove the center springs for break in.

Tom Meyer · 01-19-2017, 08:28 PM

I just thought it would be easier to use them instead of doing the springs, but at 250$ that's will be the cheapest. Thanks to all that replied. Tom

01-19-2017, 09:07 AM	#1
Tom Meyer Senior Member Join Date: Aug 2003 Location: Pierce NE Posts: 936 Likes: 78 Liked 354 Times in 120 Posts	Small ratio rockers Where do you find small ratio rocker for cam break in for SBC. Thanks Tom __________________ Tom Meyer 5240 SS Stock ???

01-19-2017, 09:12 AM	#2
cad Senior Member Join Date: Apr 2009 Location: Omaha, NE Posts: 702 Likes: 202 Liked 91 Times in 51 Posts	Re: Small ratio rockers Tom, Jegs: http://www.jegs.com/webapp/wcs/store...rsistYmm=false Or, Speedway should have them. Clark

01-19-2017, 09:26 AM	#3
Robert Simpson Senior Member Join Date: Aug 2004 Location: Jacksonville, Florida Posts: 808 Likes: 7 Liked 20 Times in 12 Posts	Re: Small ratio rockers Competition Products sells them through Howard Cams. Not bad looking at all. 1.3 ratio I think. Robert

01-19-2017, 09:34 AM	#4
Alan Nyhus VIP Member Join Date: Dec 2002 Location: Lower Dakota territory Posts: 1,180 Likes: 1,074 Liked 799 Times in 236 Posts	Re: Small ratio rockers Tom, Speedways 'house brand' are pretty reasonably priced. http://www.speedwaymotors.com/Search?query=1.3+rockers __________________ "That'll never work....."

01-19-2017, 12:39 PM	#6
carl hinkson Member Join Date: Feb 2007 Location: NORTHEAST Posts: 287 Likes: 1 Liked 18 Times in 10 Posts	Re: Small ratio rockers I have crower 1.2and 3.5 ratio and during cylinder head machining the push rod holes may have to elongated to except those rockers. It maybe easier to remove the center springs for break in.

01-19-2017, 08:28 PM	#7
Tom Meyer Senior Member Join Date: Aug 2003 Location: Pierce NE Posts: 936 Likes: 78 Liked 354 Times in 120 Posts	Re: Small ratio rockers I just thought it would be easier to use them instead of doing the springs, but at 250$ that's will be the cheapest. Thanks to all that replied. Tom __________________ Tom Meyer 5240 SS Stock ???