|
![]() |
#1 |
VIP Member
Join Date: Dec 2001
Location: phoenix
Posts: 1,486
Likes: 66
Liked 704 Times in 281 Posts
|
![]()
Installed a RPM datalogger and have noticed my converter is about 200 rpm's to tight. I currently have a 4.30 rear gear and going to change to a 4.88. Will the converter become tighter due to not working so hard ( lack of a better term) with the 4.88? I have a converter that is about 400 rpm's looser then the one in the car now and the motor is out and can change quickly. Thanks in advance Jeff
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Apr 2008
Location: east hartford ct.
Posts: 539
Likes: 0
Liked 9 Times in 3 Posts
|
![]()
yes more gear will make the convertor flash at a lower rpm.
__________________
Mark Markow 171 ss/tb |
![]() |
![]() |
![]() |
#3 |
VIP Member
Join Date: Dec 2001
Location: phoenix
Posts: 1,486
Likes: 66
Liked 704 Times in 281 Posts
|
![]() |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Feb 2002
Location: Southeast Michigan
Posts: 909
Likes: 70
Liked 239 Times in 114 Posts
|
![]()
Just a suggestion , make one change at a time .
|
![]() |
![]() |
![]() |
|
|