Transmission Shields

Greg Barsamian · 03-09-2022, 11:59 AM

What are some of the "Best Fitting" Transmission shields available?
(We've used the "Waters" shields in the past on other applications)

Looking for some Options/Opinions/Suggestions for use in our BB, 70 Chevelle SS using a Metric 200

TIA

SSDiv6 · 03-09-2022, 03:09 PM

Quote:

Originally Posted by Greg Barsamian

What are some of the "Best Fitting" Transmission shields available?
(We've used the "Waters" shields in the past on other applications)

Looking for some Options/Opinions/Suggestions for use in our BB, 70 Chevelle SS using a Metric 200

TIA

https://transmissionshield.com/th200-trans-shield

http://www.scottmcclayengineering.co...nsmission.html

Bobby Lundholm · 03-09-2022, 03:36 PM

Call Ken Keir. He makes a 200 blanket.

garyc · 03-09-2022, 03:47 PM

most shields have floor issues try CSR, a blanket would fit best

Frank Bialas · 03-09-2022, 04:59 PM

Quote:

Originally Posted by garyc

most shields have floor issues try CSR, a blanket would fit best

from my experience CSR is absolutely the worst fitting, with no recourse for recertification if modified in any way. Problem may just be with my combo, but was also told by their tech dept. that they were never designed for a full floor but for dragster design.

SDT1DYI · 03-09-2022, 07:28 PM

Think about putting on a J&W SFI bellhousing on it. Maybe a little more $ but a lot easier.

Steve Teeter Stk/SS 620

e vassar · 03-09-2022, 07:36 PM

We have the Ken Kier on a metric 200 Probably the best one out there.

DCox · 03-09-2022, 09:39 PM

Ken Keir has a very nice one

SSDiv6 · 03-09-2022, 11:43 PM

The Tom Waters Race Car Products Shield sold by Scott McClay and others, fits nice and has no issues on a SS/GT Cobalt.

Chipper Chapman · 03-10-2022, 10:39 PM

Quote:

Originally Posted by SSDiv6

The Tom Waters Race Car Products Shield sold by Scott McClay and others, fits nice and has no issues on a SS/GT Cobalt.

Sure is tight in stock floor A body, like massaging required tight. Your results may vary.

03-09-2022, 11:59 AM	#1
Greg Barsamian VIP Member Join Date: Jan 2002 Location: Central Massachusetts Posts: 1,400 Likes: 714 Liked 417 Times in 96 Posts	Transmission Shields What are some of the "Best Fitting" Transmission shields available? (We've used the "Waters" shields in the past on other applications) Looking for some Options/Opinions/Suggestions for use in our BB, 70 Chevelle SS using a Metric 200 TIA

03-09-2022, 03:36 PM	#3
Bobby Lundholm Member Join Date: Dec 2006 Location: Charlevoix, MI Posts: 451 Likes: 110 Liked 122 Times in 48 Posts	Re: Transmission Shields Call Ken Keir. He makes a 200 blanket. __________________ Bobby Lundholm 3516 G/SA

03-09-2022, 03:47 PM	#4
garyc Member Join Date: Mar 2021 Posts: 124 Likes: 0 Liked 51 Times in 30 Posts	Re: Transmission Shields most shields have floor issues try CSR, a blanket would fit best

03-09-2022, 07:28 PM	#6
SDT1DYI Member Join Date: Nov 2016 Location: Indianola Washington Posts: 403 Likes: 0 Liked 454 Times in 147 Posts	Re: Transmission Shields Think about putting on a J&W SFI bellhousing on it. Maybe a little more $ but a lot easier. Steve Teeter Stk/SS 620

03-09-2022, 07:36 PM	#7
e vassar Member Join Date: Jul 2015 Posts: 380 Likes: 67 Liked 271 Times in 107 Posts	Re: Transmission Shields We have the Ken Kier on a metric 200 Probably the best one out there.

03-09-2022, 09:39 PM	#8
DCox Junior Member Join Date: Dec 2021 Posts: 13 Likes: 0 Liked 4 Times in 2 Posts	Re: Transmission Shields Ken Keir has a very nice one

03-09-2022, 11:43 PM	#9
SSDiv6 VIP Member Join Date: Feb 2003 Location: Glendale, Arizona Posts: 3,044 Likes: 712 Liked 1,578 Times in 581 Posts	Re: Transmission Shields The Tom Waters Race Car Products Shield sold by Scott McClay and others, fits nice and has no issues on a SS/GT Cobalt.