Metric 200 - What do I need to make one last

KennyAnderson · 06-01-2020, 03:46 PM

Good Afternoon guys. It's time to start converting our 93 Z28 IHRA pure stock car over to be NHRA legal. Car is 90% ready it just needs a drivetrain. I already have a motor, next up is a tranny. Of course I had a good TH350 that I sold recently.....DOH! I also have a Metric 200 but it's bone stock. I have a few options for tranny builders but I wanted to pick your brains a lil. Other than the obvious, manual valve body, deep pan, etc. What do I need to make this thing live? It will get beat on as we bracket race... A LOT! LOL! Does it have the same input and or output shafts as the TH350? I have a good ATI converter for my old TH350 I'm hoping to reuse?? Also do I need a different yolk?? Mounting points?? Thanks in advance!

GUMP · 06-01-2020, 03:57 PM

I highly recommend Turbo Action. I have had a few different brands that didn't do so well.

You will need another converter. The mounts, driveshaft, and shifter will work. The tail housing has metric threads for the mount, so you will need new bolts.

ss3011 · 06-01-2020, 04:16 PM

If you get the rebuild through Scott McClay , he has an option to get you a 350/400 turbine shaft , and revised pump . That way you can use your current converter .

Bob Don · 06-01-2020, 05:24 PM

Get a J.W. Performance Ultra Bell. I cracked two cases before getting one. The case is the weak link on a TH200

https://racewithjw.com/product/ultra...-metric-to-gm/

Mark Yacavone · 06-01-2020, 06:18 PM

If you don't go with the 350/400 changeover option, you still want to get a hardened stator support shaft insert.

B Parker · 06-01-2020, 08:26 PM

Real simple Sepanek Racing Transmissions. I have 75 runs on his metric in a Big Block Chevy stocker. It's a 1970 402/375 hp making 635 hp. It's the fastest trany I've had in my car and it has lasted. BP

06-01-2020, 03:46 PM	#1
KennyAnderson Member Join Date: Sep 2013 Posts: 292 Likes: 38 Liked 360 Times in 121 Posts	Metric 200 - What do I need to make one last Good Afternoon guys. It's time to start converting our 93 Z28 IHRA pure stock car over to be NHRA legal. Car is 90% ready it just needs a drivetrain. I already have a motor, next up is a tranny. Of course I had a good TH350 that I sold recently.....DOH! I also have a Metric 200 but it's bone stock. I have a few options for tranny builders but I wanted to pick your brains a lil. Other than the obvious, manual valve body, deep pan, etc. What do I need to make this thing live? It will get beat on as we bracket race... A LOT! LOL! Does it have the same input and or output shafts as the TH350? I have a good ATI converter for my old TH350 I'm hoping to reuse?? Also do I need a different yolk?? Mounting points?? Thanks in advance!

06-01-2020, 03:57 PM	#2
GUMP VIP Member Join Date: May 2002 Location: Shelby, NC Posts: 1,832 Likes: 2,193 Liked 2,364 Times in 560 Posts	Re: Metric 200 - What do I need to make one last I highly recommend Turbo Action. I have had a few different brands that didn't do so well. You will need another converter. The mounts, driveshaft, and shifter will work. The tail housing has metric threads for the mount, so you will need new bolts.

06-01-2020, 04:16 PM	#3
ss3011 Senior Member Join Date: Feb 2002 Location: Southeast Michigan Posts: 910 Likes: 70 Liked 239 Times in 114 Posts	Re: Metric 200 - What do I need to make one last If you get the rebuild through Scott McClay , he has an option to get you a 350/400 turbine shaft , and revised pump . That way you can use your current converter .

06-01-2020, 05:24 PM	#4
Bob Don VIP Member Join Date: Oct 2002 Location: Greater Boston Posts: 1,498 Likes: 1,149 Liked 905 Times in 193 Posts	Re: Metric 200 - What do I need to make one last Get a J.W. Performance Ultra Bell. I cracked two cases before getting one. The case is the weak link on a TH200 https://racewithjw.com/product/ultra...-metric-to-gm/ __________________ Bob Don 128 SS

06-01-2020, 06:18 PM	#5
Mark Yacavone Veteran Member Join Date: Mar 2002 Location: Miles From Nowhere Posts: 7,840 Likes: 2,932 Liked 5,148 Times in 1,965 Posts	Re: Metric 200 - What do I need to make one last If you don't go with the 350/400 changeover option, you still want to get a hardened stator support shaft insert. __________________ "We are lucky we don't get as much Government as we pay for." Will Rogers

06-01-2020, 08:26 PM	#6
B Parker Senior Member Join Date: Sep 2009 Posts: 852 Likes: 995 Liked 2,343 Times in 465 Posts	Re: Metric 200 - What do I need to make one last Real simple Sepanek Racing Transmissions. I have 75 runs on his metric in a Big Block Chevy stocker. It's a 1970 402/375 hp making 635 hp. It's the fastest trany I've had in my car and it has lasted. BP

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode