|
|
05-16-2012, 08:42 PM | #1 |
Junior Member
Join Date: Apr 2012
Posts: 14
Likes: 0
Liked 0 Times in 0 Posts
|
gauge of wire for Alternator to battery?
What gauge wire would you guys use for a 1 wire 140 amp alternator lead to the battery positive side mounted at the rear of the car?
Is #10 gauge alright? |
05-16-2012, 09:15 PM | #2 |
Member
Join Date: Aug 2010
Location: CT
Posts: 405
Likes: 1,305
Liked 280 Times in 120 Posts
|
Re: gauge of wire for Alternator to battery?
I believe that #10 wire will only carry 30 amps, can't imagine 140 going thru that small of a wire - maybe a #6 is enough? I would think that should be a lot closer.
__________________
Phil Molski PMR Performance S/C 1623 |
05-16-2012, 09:42 PM | #3 |
VIP Member
Join Date: May 2006
Location: Murfreesboro TN
Posts: 4,950
Likes: 1,044
Liked 1,124 Times in 296 Posts
|
Re: gauge of wire for Alternator to battery?
Six or eight gauge, minimum.
__________________
Alan Roehrich 212A G/S |
05-16-2012, 10:18 PM | #4 |
VIP Member
Join Date: Jan 2005
Location: Where the Green Grass Grows, AL
Posts: 2,375
Likes: 0
Liked 3 Times in 3 Posts
|
Re: gauge of wire for Alternator to battery?
I've got a #6 but my battery is in the front
__________________
Chad Rhodes 2113 I/SA |
05-17-2012, 01:04 PM | #5 |
Senior Member
Join Date: Sep 2007
Posts: 574
Likes: 6
Liked 44 Times in 22 Posts
|
Re: gauge of wire for Alternator to battery?
20' long wire for 140 amps would be 0 gauge. See the table in this thread on yellowbullet:
http://www.yellowbullet.com/forum/sh...ad.php?t=47266 |
05-17-2012, 02:32 PM | #6 |
Junior Member
Join Date: Apr 2012
Posts: 14
Likes: 0
Liked 0 Times in 0 Posts
|
Re: gauge of wire for Alternator to battery?
Okay, so 6 or 8 gauge it is. I was lead to believe that 10 gauge was enough for the field stud from the alternator to the battery. Yes, the battery is in the trunk.
What type of wire is good? crosslink? solid strand? |
|
|