|
|
|
|
06-17-2008, 08:47 PM
|
#1 |
|
Junior Member
Join Date: Apr 2005
Location: Chamberlain
Posts: 10
Likes: 0
Liked 0 Times in 0 Posts
|
Lt1 Headers
Who makes a good LT1 header for 98 firebird or camaro for stock would like a step header.
|
|
|
|
06-17-2008, 09:11 PM
|
#2 |
|
Senior Member
Join Date: Feb 2002
Location: Southeast Michigan
Posts: 903
Likes: 69
Liked 237 Times in 112 Posts
|
Re: Lt1 Headers
Hedman makes a great header for Camaro and Firebirds with an LT1, Slips right in place.
|
|
|
|
|
06-17-2008, 09:53 PM
|
#3 |
|
Senior Member
Join Date: Sep 2004
Location: Cumming,Ga. USA
Posts: 967
Likes: 36
Liked 60 Times in 12 Posts
|
Re: Lt1 Headers
Joker, call Hedman, and ask for MIke Thomas or Phillip Wigington. They have the ones you want for that set up.
770-664-8880
__________________
2894 STK |
|
|
|
|
06-19-2008, 02:25 PM
|
#4 |
|
Junior Member
Join Date: Apr 2005
Location: Chamberlain
Posts: 10
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Lt1 Headers
So what step header size would work best?
|
|
|
|
|
06-19-2008, 03:11 PM
|
#5 |
|
VIP Member
Join Date: Jun 2007
Location: Northern New Jersey suburbs
Posts: 2,312
Likes: 25
Liked 543 Times in 212 Posts
|
Re: Lt1 Headers
I had Hedman's and they were stepped...1-5/8 to 1-3/4 with 3" collectors. They fit pretty well but the driver's side was a little tight and close to my steering shaft. I could install them from underneath. Passenger side went right on, drivers side required a little more juggling and I usually moved the steering rack forward to get it on easier without scratching the pipes. Changing spark plugs was very tough on # 5 cyl. Dynatechs fit well I have been told. There are better sets available but they cost considerably more.......
__________________
Rich Biebel S/C 1479 Stock 147R |
|
|
|
 |
|
|
Hybrid Mode
