shifter in factory console, 3rd Gen Camaro/Firebird

[Dragsinger]

Racers,

let me here about an automatic shifter that will fit in the factory console or a 3rd Generation Camaro/Firebird.

Thanks
Larry Woodfin

[Michael Iacono]

Turbo action air shifter fits nicely

[Ron Miller]

I have a B & M Pro Stick mounted in mine with a no cover of course with a SHIF NOIDE mounted behind the shifter. The Pro Stick is almost identical to the 1/4 stick. So mounting will be the same. You will have to make a lower bracket to mount the 1/4 stick shifter body on top of the trans tunnel sheet metal. This all will fit in the center console. I maid my own top cover out of aluminum, painted it with the SEM plastic satin black paint. I also had to make a extension for the reverse lever. Its doable if you all ready have a 1/4 stick. Its easier that it sounds to mount it. Mock it up first and you will see what it takes. Send me a e-mail rmiller249@comcast.net. I can take a picture of my set up for you and send it back.

Ron Miller 92Camaro GT/DA 3287
Brownstown, Mi

[LNorton]

I have seen a lot of guys fit a quarter stick in the factory console in 3rd Gens. Here are 2 pictures of one in our 4th Gen.

[Dragsinger]

Lee,

Thanks, looks good.

Also, what is the gauge near the right kick panel?

Larry

[Jim Carter]

I have a question that is somewhat related:
How and where are most racers locating their neutral safety switch for trouble-free performance with a Quarter Stick??
Thanks.

JC

[Ron Miller]

I thought I would add my pictures that I sent to Larry, but I can not. Do you have to have special privileges. So if any one can help let me know.

Thanks,

Ron Miller 92Camaro GT/DA 3287
Brownstown, Mi

[Doug Blackley]

Both the Turbo Action SCS and Hurst Quarter stick will work with the 3rd gen console. Minor mods to the automatic bezel finish it nicely.

[LNorton]

Originally Posted by Dragsinger

Lee,

Thanks, looks good.

Also, what is the gauge near the right kick panel?

Larry

Thanks Larry!

The gauge is a water temp gauge.

Originally Posted by Jim Carter

I have a question that is somewhat related:
How and where are most racers locating their neutral safety switch for trouble-free performance with a Quarter Stick??
Thanks.

JC

I use the NSS that came with the shifter. It is located within the assembly. Has been flawless for us!