In Car Valve Spring Tester

Cam · 06-02-2009, 08:37 AM

My 1994 C/S Camaro is finally together and running. I saw the thread on in car valve spring tools and was looking for a good in car valve spring tester for the late model Camaro's. With the engine set back under the cowel, I don't think a conventional tool would work. What works in this application?
Cam

Bill Edgeworth · 06-02-2009, 09:08 AM

The LSM low profile one should work. You can check it out on their web site.

rx dealer · 06-02-2009, 11:42 AM

I have the moroso low profile tester and there is no room what so ever for the back 4 cylinders. I don't think the LSM unit will fit either. I have a 93 super stock firebird and it's not fun to check springs on the back 4. It's easier to pull the motor out and do your check...Luke

casper · 06-02-2009, 01:39 PM

Cam .. good to hear you got it running ... no devastating launches this time I hope . Call me

Mike

403-304-3536

Bill Edgeworth · 06-02-2009, 03:12 PM

Quote:

Originally Posted by rx dealer

I have the moroso low profile tester and there is no room what so ever for the back 4 cylinders. I don't think the LSM unit will fit either. I have a 93 super stock firebird and it's not fun to check springs on the back 4. It's easier to pull the motor out and do your check...Luke

I don’t own one of those cars so I’m no expert. But there is a significant difference in the design between the LSM and Moroso units.
Won’t the LSM one with the short handle fit? Although in an SS motor it would be tough to pull enough pressure to check the seat pressure even if it fits its underneath the cowl with the short handle. I think a while back there was a thread where someone with one of those cars mentioned he had an LSM and made a custom offset handle for it or possibly broached the handle so he could apply torque to it with a ratchet and extension from outside the cowl area.
Check out the LSM one at;
http://www.lsmproducts.com/photo/pro...l/pc100slc.jpg

Rich Biebel · 06-02-2009, 07:26 PM

I re- read your post and realized you were looking for a tester....not a remover. I don't know what on the car tester would work as there is very little room at the rear of the engine. I changed mine due to some broken dampners.....You can change a complete set in a couple hours tops with the KD tool......

Cam · 06-04-2009, 08:51 AM

Thank you for the replys. I'm waiting to hear back from Logan. I will post the info I get back.
Cam

06-02-2009, 08:37 AM	#1
Cam Junior Member Join Date: May 2004 Location: Prince George, BC, Canada Posts: 83 Likes: 5 Liked 0 Times in 0 Posts	In Car Valve Spring Tester My 1994 C/S Camaro is finally together and running. I saw the thread on in car valve spring tools and was looking for a good in car valve spring tester for the late model Camaro's. With the engine set back under the cowel, I don't think a conventional tool would work. What works in this application? Cam

06-02-2009, 09:08 AM	#2
Bill Edgeworth Member Join Date: Oct 2006 Location: Tacoma, WA Posts: 258 Likes: 0 Liked 0 Times in 0 Posts	Re: In Car Valve Spring Tester The LSM low profile one should work. You can check it out on their web site. __________________ Bill Edgeworth 6471 STK

06-02-2009, 11:42 AM	#3
rx dealer Member Join Date: Mar 2007 Location: Lake Orion, Michigan Posts: 337 Likes: 12 Liked 53 Times in 13 Posts	Re: In Car Valve Spring Tester I have the moroso low profile tester and there is no room what so ever for the back 4 cylinders. I don't think the LSM unit will fit either. I have a 93 super stock firebird and it's not fun to check springs on the back 4. It's easier to pull the motor out and do your check...Luke

06-02-2009, 01:39 PM	#4
casper Member Join Date: Nov 2002 Location: Canada Posts: 112 Likes: 4 Liked 1 Time in 1 Post	Re: In Car Valve Spring Tester Cam .. good to hear you got it running ... no devastating launches this time I hope . Call me Mike 403-304-3536

06-02-2009, 07:26 PM	#6
Rich Biebel VIP Member Join Date: Jun 2007 Location: Northern New Jersey suburbs Posts: 2,314 Likes: 25 Liked 544 Times in 213 Posts	Re: In Car Valve Spring Tester I re- read your post and realized you were looking for a tester....not a remover. I don't know what on the car tester would work as there is very little room at the rear of the engine. I changed mine due to some broken dampners.....You can change a complete set in a couple hours tops with the KD tool...... __________________ Rich Biebel S/C 1479 Stock 147R Last edited by Rich Biebel; 06-03-2009 at 04:40 PM.

06-04-2009, 08:51 AM	#7
Cam Junior Member Join Date: May 2004 Location: Prince George, BC, Canada Posts: 83 Likes: 5 Liked 0 Times in 0 Posts	Re: In Car Valve Spring Tester Thank you for the replys. I'm waiting to hear back from Logan. I will post the info I get back. Cam