Need carb. Help

NORMAN BARNARD · 06-10-2009, 10:43 AM

I have a old afb carter carb. P/n 3633-s that i need to know what stock jets and rods came in it. Carb. Is off a old 64 buick with a 401 motor, this is a restoration job.
Any help would be appreciated. Answer on the form or send me a pm.
Thanks.......norm

Larry Fulton · 06-10-2009, 11:13 AM

based on info in the OLD MANUAL that I have,

3633S = auto trans 401" calls for

Prim. Jet @ .092" (pn.-120-256)
Sec. Jet @ .082" (pn.-120-158)

step-up rod = pn.- 16-219
1 step lean = pn.- 16-252U

accell pump shooters @ .028"

Hope this helps!!

NORMAN BARNARD · 06-10-2009, 11:34 AM

Larry,
thanks for the info. The carb. The jets/rods. That are in it are considerably
leaner (primary) causing the surging going down the highway. Question: Would you also have the venturi/booster spec's for this carb? Just want to make sure everything else is ok, also the factory cfm rating.

Thanks for your time and info.....norm

BlueOval Ralph · 06-10-2009, 12:13 PM

Check this out

http://www.arnolt.com/articles/carterafbtuning.pdf

http://www.carburetion.com/Carter4.htm

Quote:

Originally Posted by NORMAN BARNARD

Larry,
thanks for the info. The carb. The jets/rods. That are in it are considerably
leaner (primary) causing the surging going down the highway. Question: Would you also have the venturi/booster spec's for this carb? Just want to make sure everything else is ok, also the factory cfm rating.

Thanks for your time and info.....norm

NORMAN BARNARD · 06-10-2009, 05:19 PM

Ralph,

thanks for the web site info.

Norm

06-10-2009, 10:43 AM	#1
NORMAN BARNARD Member Join Date: Mar 2006 Location: EL PASO, TEXAS Posts: 156 Likes: 0 Liked 2 Times in 2 Posts	Need carb. Help I have a old afb carter carb. P/n 3633-s that i need to know what stock jets and rods came in it. Carb. Is off a old 64 buick with a 401 motor, this is a restoration job. Any help would be appreciated. Answer on the form or send me a pm. Thanks.......norm

06-10-2009, 11:13 AM	#2
Larry Fulton Member Join Date: Oct 2003 Posts: 271 Likes: 52 Liked 0 Times in 0 Posts	Re: Need carb. Help based on info in the OLD MANUAL that I have, 3633S = auto trans 401" calls for Prim. Jet @ .092" (pn.-120-256) Sec. Jet @ .082" (pn.-120-158) step-up rod = pn.- 16-219 1 step lean = pn.- 16-252U accell pump shooters @ .028" Hope this helps!! __________________ Larry Fulton

06-10-2009, 11:34 AM	#3
NORMAN BARNARD Member Join Date: Mar 2006 Location: EL PASO, TEXAS Posts: 156 Likes: 0 Liked 2 Times in 2 Posts	Re: Need carb. Help Larry, thanks for the info. The carb. The jets/rods. That are in it are considerably leaner (primary) causing the surging going down the highway. Question: Would you also have the venturi/booster spec's for this carb? Just want to make sure everything else is ok, also the factory cfm rating. Thanks for your time and info.....norm

06-10-2009, 05:19 PM	#5
NORMAN BARNARD Member Join Date: Mar 2006 Location: EL PASO, TEXAS Posts: 156 Likes: 0 Liked 2 Times in 2 Posts	Re: Need carb. Help Ralph, thanks for the web site info. Norm