Engine Diapers

DIAPERMAN · 07-01-2009, 03:09 AM

Just to let all the Stock /Super Stock guys know DRE has diapers with motor mounts cut out and 3000 degree heat cloth on the side of diaper for your factory motor mount cars and close headers.WE also make custom diapers.I know most of you are not required yet,but it could save your car and yourself if you have any questions just call anytime 217-454-5289 PS We are glad to support this site Diaperman

Brian Oakes · 07-01-2009, 08:44 AM

Diaperman

I know you had a SS car before, but didn't know size of the oilpan, but in my Camaro i have appx 1/4" to 1/8" from the cross member to the pan, all around, i have a pan that is big as a oil drum and any SS car out there that goes fast will have one on them, also my sump goes 6 " pass and under the flywheel, now that would make a mess getting caught up..Next time ya see me or i see you, you can look at my car and tell me if you can make one, one another Note, i was at a bracket race 2 weeks ago and i say a friend roll his dragster out of the trailer, with a oil slick under it in the trailer, after emptying out 4 Qts of oil( and the diaper never leaked, it overflowed LOL,there was a long crack in a new pan, if the diaper was not on there, he would have seen it, i know the diaper went over the fence, LOL Thanks Brian

DIAPERMAN · 07-01-2009, 10:00 AM

We can build a diaper for your application it will have to be custom.We did a big part of the comp cars.As far as the dragster issue if the pan cracked going down the track or if he blew his engine at finish line I am sure he would of been glad to have the diaper on.I get lots of calls about guys that blew engines and it save their car and maybe them,so you can always come up with a negative about anything. give me a call 217-454-5289

07-01-2009, 03:09 AM	#1
DIAPERMAN Senior Member Join Date: Apr 2007 Location: ILLINIOS Posts: 715 Likes: 2 Liked 21 Times in 6 Posts	Engine Diapers Just to let all the Stock /Super Stock guys know DRE has diapers with motor mounts cut out and 3000 degree heat cloth on the side of diaper for your factory motor mount cars and close headers.WE also make custom diapers.I know most of you are not required yet,but it could save your car and yourself if you have any questions just call anytime 217-454-5289 PS We are glad to support this site Diaperman

07-01-2009, 08:44 AM	#2
Brian Oakes Senior Member Join Date: Apr 2004 Posts: 570 Likes: 2 Liked 408 Times in 115 Posts	Re: Engine Diapers Diaperman I know you had a SS car before, but didn't know size of the oilpan, but in my Camaro i have appx 1/4" to 1/8" from the cross member to the pan, all around, i have a pan that is big as a oil drum and any SS car out there that goes fast will have one on them, also my sump goes 6 " pass and under the flywheel, now that would make a mess getting caught up..Next time ya see me or i see you, you can look at my car and tell me if you can make one, one another Note, i was at a bracket race 2 weeks ago and i say a friend roll his dragster out of the trailer, with a oil slick under it in the trailer, after emptying out 4 Qts of oil( and the diaper never leaked, it overflowed LOL,there was a long crack in a new pan, if the diaper was not on there, he would have seen it, i know the diaper went over the fence, LOL Thanks Brian

07-01-2009, 10:00 AM	#3
DIAPERMAN Senior Member Join Date: Apr 2007 Location: ILLINIOS Posts: 715 Likes: 2 Liked 21 Times in 6 Posts	Re: Engine Diapers We can build a diaper for your application it will have to be custom.We did a big part of the comp cars.As far as the dragster issue if the pan cracked going down the track or if he blew his engine at finish line I am sure he would of been glad to have the diaper on.I get lots of calls about guys that blew engines and it save their car and maybe them,so you can always come up with a negative about anything. give me a call 217-454-5289