Very interesting!!!!!!!!!!

Stephen & Horace Johnson · 10-27-2009, 10:18 PM

http://www.competitionplus.com/index...-for-stockers-

Jeff Lee · 10-27-2009, 11:42 PM

There are specialty shops / engine builders that have been making these for awhile now. Now this parts have made it to the big time.

Ed Fernandez · 10-28-2009, 09:03 PM

Are they legal for Stock?

Stephen & Horace Johnson · 10-28-2009, 09:23 PM

Quote:

Originally Posted by Ed Fernandez

Are they legal for Stock?

That's what I was so curious about????

Chad Rhodes · 10-28-2009, 09:53 PM

this isnt new, just the first time it has been advertised

Dwight Southerland · 10-29-2009, 07:03 AM

Quote:

Originally Posted by Chad Rhodes

this isnt new, just the first time it has been advertised

This has been being done by some people since the late 70's. Just goes to the power of advertising.

Ed Fernandez · 10-28-2009, 10:08 PM

Quote:

Originally Posted by Stephen & Horace Johnson

That's what I was so curious about????

Nobody's commiting.

JRyan · 10-28-2009, 10:30 PM

Yeah! You can run anything that'll fit in a stock width & depth ring groove for your particular engine.

Jerry

rick lester · 10-28-2009, 10:33 PM

reading the 2009 nhra rulebook for stock, under pistons, there is nothing saying this is an illegal part. as long as there is no mods to piston to run ring, its legal. and to think, somebody has thought to finally build a ring just like this. i do know of a few people, whos names will remain nameless, that already use these rings that they have customize. there are gains to be had, depending on how cylinders are prepared. rick.

10-27-2009, 10:18 PM	#1
Stephen & Horace Johnson Senior Member Join Date: Jul 2007 Posts: 963 Likes: 339 Liked 161 Times in 52 Posts	Very interesting!!!!!!!!!! http://www.competitionplus.com/index...-for-stockers-

10-27-2009, 11:42 PM	#2
Jeff Lee VIP Member Join Date: Jul 2007 Location: Anthem, Arizona Posts: 2,766 Likes: 0 Liked 3 Times in 3 Posts	Re: Very interesting!!!!!!!!!! There are specialty shops / engine builders that have been making these for awhile now. Now this parts have made it to the big time. __________________ Jeff Lee 7494 D/S '70 AMX

10-28-2009, 09:03 PM	#3
Ed Fernandez Veteran Member Join Date: Nov 2001 Location: NOO JOISEY nexta NOO YAWK Posts: 5,879 Likes: 38 Liked 100 Times in 45 Posts	Re: Very interesting!!!!!!!!!! Are they legal for Stock? __________________ Former NHRA #1945 Former IHRA #1945 T/SA

10-28-2009, 09:53 PM	#5
Chad Rhodes VIP Member Join Date: Jan 2005 Location: Where the Green Grass Grows, AL Posts: 2,375 Likes: 0 Liked 3 Times in 3 Posts	Re: Very interesting!!!!!!!!!! this isnt new, just the first time it has been advertised __________________ Chad Rhodes 2113 I/SA

10-28-2009, 10:30 PM	#8
JRyan Senior Member Join Date: Apr 2003 Location: Aberdeen SD Posts: 645 Likes: 30 Liked 112 Times in 31 Posts	Re: Very interesting!!!!!!!!!! Yeah! You can run anything that'll fit in a stock width & depth ring groove for your particular engine. Jerry

10-28-2009, 10:33 PM	#9
rick lester Member Join Date: Oct 2004 Location: Littlestown PA Posts: 163 Likes: 9 Liked 4 Times in 1 Post	Re: Very interesting!!!!!!!!!! reading the 2009 nhra rulebook for stock, under pistons, there is nothing saying this is an illegal part. as long as there is no mods to piston to run ring, its legal. and to think, somebody has thought to finally build a ring just like this. i do know of a few people, whos names will remain nameless, that already use these rings that they have customize. there are gains to be had, depending on how cylinders are prepared. rick.